Detection of butt weld of laser-MIG hybrid welding of thin-walled profile for high-speed train. Issue 1 (3rd May 2022)

• Record Type: Journal Article
• Authors: Zhou, Qingxiang; Liu, Fang; Li, Jingming; Li, Jiankui; Zhang, Shuangnan; Cai, Guixi
• Is Part Of: Railway sciences. Volume 1:Issue 1(2022)
• Page Start: 98
• Page End: 113
• Publication Date: 2022-05-03
• Subjects: High-speed train -- Aluminum alloy profile -- Laser-MIG hybrid welding -- Nondestructive inspection -- X-ray radiography -- Ultrasonic creeping wave detection; 625.1
• DOI: 10.1108/RS-04-2022-0010
• Languages: English
• ISSNs: 2755-0907

Abstract

Abstract : Purpose: This study aims to solve the problem of weld quality inspection, for the aluminum alloy profile welding structure of high-speed train body has complex internal shape and thin plate thickness (2–4 mm), the conventional nondestructive testing method of weld quality is difficult to implement. Design/methodology/approach: In order to solve this problem, the ultrasonic creeping wave detection technology was proposed. The impact of the profile structure on the creeping wave detection was studied by designing profile structural test blocks and artificial simulation defect test blocks. The detection technology was used to test the actual welded test blocks, and compared with the results of X-ray test and destructive test (tensile test) to verify the accuracy of the ultrasonic creeping wave test results. Findings: It is indicated that that X-ray has better effect on the inspection of porosities and incomplete penetration defects. However, due to special detection method and protection, the detection speed is slow, which cannot meet the requirements of field inspection of the welding structure of aluminum alloy thin-walled profile for high-speed train body. It can be used as an auxiliary detection method for a small number of sampling inspection. The ultrasonic creeping wave can be used to detect the incomplete penetration welds with the equivalent of 0.25 mm or more, the results of creeping wave detection correspond well with the actual incomplete penetration defects. Originality/value: The results show that creeping wave detection results correspond well with the actual non-penetration defects and can be used for welding quality inspection of aluminum alloy thin-wall profile composite welding joints. It is recommended to use the echo amplitude of the 10 mm × 0.2 mm × 0.5 mm notch as the criterion for weld qualification.