Solution-processed phosphorus-tungsten oxide film as hole injection layer for application in efficient organic light-emitting diode. (October 2018)

• Record Type: Journal Article
• Authors: Deng, Weiwei; Wang, Shirong; Xiao, Yin; Zhou, Nonglin; Li, Xianggao
• Is Part Of: Materials science in semiconductor processing. Volume 85(2018)
• Page Start: 106
• Page End: 112
• Publication Date: 2018-10
• Subjects: Phosphotungstic acid -- Phosphorus-tungsten oxide -- Hole injection layer -- Spin-coating process -- Organic light-emitting diode; Semiconductors -- Periodicals; Integrated circuits -- Materials -- Periodicals; Semiconducteurs -- Périodiques; Circuits intégrés -- Matériaux -- Périodiques; Electronic journals; 621.38152
• DOI: 10.1016/j.mssp.2018.06.007
• Languages: English
• ISSNs: 1369-8001

Abstract

Abstract: The research on new functional layer materials and optimization of fabrication in organic light-emitting diode (OLED) has been continuously concerned. In this work, phosphotungstic acid solution used as a precursor is spin-coated onto ITO anode, and then a phosphorus-tungsten oxide (WO3 -P2 O5 ) film is obtained after annealing treatment. Various parameters which include film composition, surface morphology, work function and optical property are measured. It suggests that the film has the composition of 24 WO3 ·P2 O5 annealed at 200 °C, which exhibits work function of 5.55 eV, surface root mean square (RMS) roughness value of 1.525 nm and optical transmittance of over 92%. The WO3 -P2 O5 film is used as hole injection layer (HIL), and the OLED with the structure of [ITO/ WO3 -P2 O5 / TPD/ Alq3 / LiF/ Al] is fabricated. The performance of device shows turn-on voltage of 2.6 V, maximum luminance of 13553 cd/m 2, maximum current efficiency of 5.87 cd/A and maximum power efficiency of 3.44 lm/W, respectively. The results provide a new way to deposit HIL based on solution-processed metal oxide in efficient OLED.