Brewing with 100% green malt – process development and key quality indicators. Issue 4 (27th September 2020)

• Record Type: Journal Article
• Authors: Dugulin, Celina A.; Acuña Muñoz, Luisa M.; Buyse, Jasper; De Rouck, Gert; Bolat, Irina; Cook, David J.
• Is Part Of: Journal of the Institute of Brewing. Volume 126:Issue 4(2020)
• Page Start: 343
• Page End: 353
• Publication Date: 2020-09-27
• Subjects: green malt -- brewing -- sustainable brewing -- lipoxygenase -- DMS control -- beer colour; Brewing -- Periodicals; 663.305
• DOI: 10.1002/jib.620
• Languages: English
• ISSNs: 0046-9750

Abstract

Abstract : Brewing with undried, germinated (green) malt has the potential to lower energy and water usage in the malting and brewing chain. However, doing so introduces technical and biochemical (flavour) challenges. Beers were brewed using 100% green malt (n = 3) or kilned pilsner malt (n = 3), prepared from the same batch in each case, utilising the pilot brewery at KU Leuven (2.5 hL). Three further pairs of beers were brewed whereby the green malt was pre‐steeped under deaerated water for 1 hour; this procedure was previously shown to lower LOX activity in green malt. Six green malt beers were brewed with acceptable specifications in terms of pH, alcohol content, foam stability and colour. No significant taints or obvious defects were detected in green malt beers. Increased S‐methyl methionine levels were measured in worts and beers made from green malt, however DMS concentrations in the finished beers did not differ significantly from the reference beers. Furthermore, the results demonstrated promising indicators for flavour stability, such as reduced TBI, lower residual FAN and trihydroxy fatty acid (THFA) levels in brews using untreated green malt. Using re‐steep water in green malt brewing (for reasons of water economy), however, increased THFA levels, possibly because oxygen uptake was not adequately controlled at this step. Whilst further process optimisations are undoubtedly required, it is shown that an acceptable lager style beer could be brewed to a specification not dissimilar to that of a kilned malt control beer, using 100% green malt with intact rootlets. © 2020 The Authors. Journal of the Institute of Brewing published by John Wiley & Sons Ltd on behalf of The Institute of Brewing & Distilling