Optimization of phosphorus removal in secondary effluent using immersed ultrafiltration membranes with in-line coagulant pretreatment  —  implications for advanced water treatment and reuse applications. Issue 3 (1st November 2013)

• Record Type: Journal Article
• Authors: Kent, Fraser; Farahbakhsh, Khosrow; Citulski, Joel
• Is Part Of: Journal of environmental engineering and science. Volume 8:Issue 3(2013)
• Page Start: 359
• Page End: 370
• Publication Date: 2013-11-01
• Subjects: Environmental engineering -- Periodicals; Sanitary engineering -- Periodicals; Environmental engineering -- Canada -- Periodicals; Environnement, Technique de l' -- Périodiques; Technique sanitaire -- Périodiques; Environnement, Technique de l' -- Canada -- Périodiques; Environmental engineering; Sanitary engineering; Canada; Electronic journals; Computer network resources; Periodicals; 628.05
• DOI: 10.1680/jees.2013.0036
• Languages: English
• ISSNs: 1496-2551

Abstract

Abstract : In-line addition of alum and ferric chloride was conducted at a hollow-fibre immersed ultrafiltration (UF) membrane pilot plant, using secondary effluent from a municipal wastewater treatment plant (WWTP) as the feed. The objective of such pretreatment was to remove phosphorus from the feed from an initial concentration of approximately 5 mg/L to below 0·3 mg/L. The simplified in-line coagulant addition process involved hydraulic mixing of the coagulant into the feed and subsequent flocculation, and a greatly reduced (12 – 14 min) flocculation time relative to conventional coagulation-flocculation-settling treatment. Both alum and ferric chloride effectively removed phosphorus to below the 0·3 mg/L threshold when applied as a pretreatment at optimized doses, both of which were below the WWTP's current coagulant dose (as ferrous chloride). This simplified pre-treatment scheme provided consistent enhanced removal of phosphorus and organic compounds. These results suggest that simplified in-line coagulant addition in advance of immersed UF membranes enhances the ability to produce treated effluent suitable for water-reuse applications.