Fabrication of efficient graphene-doped polymer/fullerene bilayer organic solar cells in air using spin coating followed by ultrasonic vibration post treatment. (December 2016)

• Record Type: Journal Article
• Authors: Zabihi, Fatemeh; Chen, Qianli; Xie, Yu; Eslamian, Morteza
• Is Part Of: Superlattices and microstructures. Volume 100(2016)
• Page Start: 1177
• Page End: 1192
• Publication Date: 2016-12
• Subjects: Organic photovoltaics -- Polymer solar cells -- Bilayer polymer solar cells -- Graphene -- Ultrasonic substrate vibration post treatment (SVPT); Superlattices as materials -- Periodicals; Microstructure -- Periodicals; Semiconductors -- Periodicals; Superréseaux -- Périodiques; Microstructure (Physique) -- Périodiques; Semiconducteurs -- Périodiques; 621.38152
• DOI: 10.1016/j.spmi.2016.10.087
• Languages: English
• ISSNs: 0749-6036

Abstract

Abstract: In this work, in an attempt to improve the performance and lifetime of organic solar cells, P3HT photon absorbing polymer was doped with graphene (G) nano-sheets, to make light harvesting G-P3HT composite thin film. The composite this film was then employed as the donor of a bilayer organic solar cell with the structure of glass/ITO/PEDOT:PSS/G-P3HT/C60/Al. The reference P3HT:PCBM bulk heterojunction solar cell was also fabricated for comparison. All solution-processed layers were made by spin coating in humid air (Shanghai, China); C60 and Al were deposited by thermal evaporation. An effective mechanical treatment approach developed by the authors, i.e. the application of forced ultrasonic vibration on the wet spun-on films, was used to improve the dispersion of graphene in G-P3HT composite films to obtain a uniform nanostructure. This mechanical method eliminates tedious and expensive chemical steps, currently performed to engineer the structure of organic solar cells. It is evidenced that the G-P3HT composite thin films, post treated by ultrasonic vibration at the optimum vibration duration, possess superior electrical conductivity, charge carrier mobility and density, uniform surface potential distribution, and lower surface roughness, compared to those of P3HT and G-P3HT thin films made without vibration. The results show significant improvement in the power conversion efficiency (PCE) of vibration-treated G-P3HT/C60 cell (PCE = 5.17%, the highest reported for this structure), substantiating the strong positive effect of using graphene and forced vibration for the fabrication of P3HT active layer in the bilayer cell structure. Highlights: P3HT is doped by graphene nano-sheets for solar cell fabrication. Ultrasonic vibration is applied on the wet spun-on films to improve the dispersion of graphene. Superior electrical conductivity, charge carrier mobility, work function and surface roughness are achieved. PCE of 5.17% is achieved which is the highest reported for this structure.