Precise strain profile measurement as a function of depth in thermal barrier coatings using high energy synchrotron X-rays. (1st March 2016)

• Record Type: Journal Article
• Authors: Li, C.; Jacques, S.D.M.; Chen, Y.; Xiao, P.; Beale, A.M.; di Michiel, M.; Markossan, N.; Nylen, P.; Cernik, R.J.
• Is Part Of: Scripta materialia. Volume 113(2016)
• Page Start: 122
• Page End: 126
• Publication Date: 2016-03-01
• Subjects: Thermal barrier coatings -- High energy synchrotron powder diffraction; Materials -- Periodicals; Metallurgy -- Periodicals; Metalen; Legeringen; Materiaalkunde; Metals, metalworking and machinery industries; Metals; Electronic journals; 620.11
• DOI: 10.1016/j.scriptamat.2015.10.032
• Languages: English
• ISSNs: 1359-6462

Abstract

Abstract: We have developed a method of directly measuring the strain gradient as a function of depth in plasma sprayed Thermal Barrier Coatings (TBCs). A 92.8 keV monochromatic synchrotron X-ray beam was used to penetrate the 10 × 10 × 8 mm samples in transmission geometry. The samples had been heated to 1150 °C and held at that temperature for 190 h. The diffraction patterns were collected using a DECTRIS pilatus3 X CdTe 300 K area detector. The patterns were analyzed by partial circular integration followed by full Rietveld refinement to obtain the lattice parameters of the TBC top coat at 25 μm intervals as function of depth. The coatings surviving the heat treatment process without significant damage were found to exhibit a variable compressive stress state inside the top coat. This was found to be about − 600 MPa at the bond coat interface decreasing in a non-linear fashion towards the surface. By refinement of the data collected from sectors of whole Debye Scherrer rings we were able to estimate both the in-plane and out-of-plane strain. Graphical abstract: