1. "Fly ash and GGBFS based powder-activated geopolymer binders: A viable sustainable alternative of portland cement in concrete industry". (December 2016) Authors: Neupane, Kamal Journal: Mechanics of materials Issue: Volume 103(2016:Dec.) Page Start: 110 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
2. "Fly ash and GGBFS based powder-activated geopolymer binders: A viable sustainable alternative of portland cement in concrete industry". (December 2016) Authors: Neupane, Kamal Journal: Mechanics of materials Issue: Volume 103(2016:Dec.) Page Start: 110 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
3. 1-second-resolved strain mapping in Ti-6Al-4V alloys during dwell fatigue in SEM by video sampling moiré. (June 2019) Authors: Wang, Qinghua; Ri, Shien; Maenosono, Akira; Tanaka, Yoshihisa; Koyama, Motomichi Journal: Mechanics of materials Issue: Volume 133(2019) Page Start: 63 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
4. 1D cyclic yield model independent of load spectrum characteristics and its application to Inconel 718. (June 2017) Authors: Klotz, T.; Blas, S.; Lévesque, M.; Brochu, M. Journal: Mechanics of materials Issue: Volume 109(2017) Page Start: 34 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
5. 1D strain rate-dependent constitutive model of UHMWPE: From crystalline network to fibrillar structure behavior. (October 2019) Authors: Deplancke, Tiana; Fivel, Marc; Lame, Olivier Journal: Mechanics of materials Issue: Volume 137(2019) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
6. 2D triangular anti-trichiral structures and auxetic stents with symmetric shrinkage behavior and high energy absorption. (March 2020) Authors: Hamzehei, Ramin; Rezaei, Saeed; Kadkhodapour, Javad; Anaraki, Ali Pourkamali; Mahmoudi, Alireza Journal: Mechanics of materials Issue: Volume 142(2020) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
7. 3-D waves in porous piezoelectric materials. (January 2015) Authors: Vashishth, Anil K.; Gupta, Vishakha Journal: Mechanics of materials Issue: Volume 80:Part A(2015:Jan.) Page Start: 96 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
8. 3D micromechanical modeling of dual phase steels using the representative volume element method. (October 2016) Authors: Amirmaleki, Maedeh; Samei, Javad; Green, Daniel E.; van Riemsdijk, Isadora; Stewart, Lorna Journal: Mechanics of materials Issue: Volume 101(2016:Oct.) Page Start: 27 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
9. 3D micromechanical modeling of dual phase steels using the representative volume element method. (October 2016) Authors: Amirmaleki, Maedeh; Samei, Javad; Green, Daniel E.; van Riemsdijk, Isadora; Stewart, Lorna Journal: Mechanics of materials Issue: Volume 101(2016:Oct.) Page Start: 27 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
10. 3D printing of soft thermoplastic elastomers: Effect of the deposit angle on mechanical and thermo-mechanical properties. (February 2022) Authors: Tayeb, Adel; Le Cam, Jean-Benoit; Loez, Bruno Journal: Mechanics of materials Issue: Volume 165(2022) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗