1. A novel strategy for fabricating biomimetic gradient metal-ceramic composites by dynamic freeze casting and pressure infiltration. (1st July 2019) Authors: Yang, Li-Kai; Shen, Ping; Guo, Rui-Fen; Li, Yun-Liang; Jiang, Qi-Chuan Journal: Scripta materialia Issue: Number 167(2019) Page Start: 101 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
2. A special single variant zone in directionally solidified Ni-Mn-Ga alloy. (1st July 2019) Authors: Dai, Yanchao; Hou, Long; Chulist, Robert; Fautrelle, Yves; Li, Zongbin; Yang, Bo; Esling, Claude; Ren, Zhongming; Li, Xi Journal: Scripta materialia Issue: Number 167(2019) Page Start: 105 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
3. A {112}Σ3 grain boundary generated from the decomposition of a Σ9 grain boundary in multicrystalline silicon during directional solidification. (1st July 2019) Authors: Chuang, Lu-Chung; Maeda, Kensaku; Shiga, Keiji; Morito, Haruhiko; Fujiwara, Kozo Journal: Scripta materialia Issue: Number 167(2019) Page Start: 46 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
4. An effective Schmid factor in consideration of combined normal and shear stresses for slip/twin variant selection of Mg-3Al-1Zn alloy. (1st July 2019) Authors: Chen, Shuai-Feng; Song, Hong-Wu; Zhang, Shi-Hong; Cheng, Ming; Zheng, Ce; Lee, Myoung-Gyu Journal: Scripta materialia Issue: Number 167(2019) Page Start: 51 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
5. An in situ investigation of the solute suppressed nucleation zone in an Al-15 wt% Cu alloy inoculated by Al-Ti-B. (1st July 2019) Authors: Jia, Yiwang; Huang, Haijun; Fu, Yanan; Zhu, Guoliang; Shu, Da; Sun, Baode; StJohn, D.H. Journal: Scripta materialia Issue: Number 167(2019) Page Start: 6 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
6. Bent strain values affect the plastic deformation behaviours of twinned Ni NWs. (1st July 2019) Authors: Wang, Lihua; Sun, Tao; Wei, Rujian; Guan, Pengfei; Liu, Pan; Chen, Minwei; Zhang, Ze; Han, Xiaodong Journal: Scripta materialia Issue: Number 167(2019) Page Start: 1 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
7. Circular loops of misfit dislocations in decahedral core-shell nanoparticles. (1st July 2019) Authors: Krauchanka, M.Yu.; Krasnitckii, S.A.; Gutkin, M.Yu.; Kolesnikova, A.L.; Romanov, A.E. Journal: Scripta materialia Issue: Number 167(2019) Page Start: 81 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
8. Cu-incorporation by melt-spinning in n-type Bi2Te2.7Se0.3 alloys for low-temperature power generation. (1st July 2019) Authors: Kim, Minyoung; Kim, Sang-il; Cho, Hyun-joon; Mun, Hyuna; Kim, Hyun-sik; Lim, Jae-Hong; Kim, Sung Wng; Lee, Kyu Hyoung Journal: Scripta materialia Issue: Number 167(2019) Page Start: 120 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
9. Determination of local residual stress in an air plasma spray thermal barrier coating (APS-TBC) by microscale ring coring using a picosecond laser. (1st July 2019) Authors: Zhang, Xun; Li, Chun; Withers, Philip J.; Markocsan, Nicolaie; Xiao, Ping Journal: Scripta materialia Issue: Number 167(2019) Page Start: 126 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
10. Editorial Board. (1st July 2019) Journal: Scripta materialia Issue: Number 167(2019) Page Start: iii Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗