1. A case study on an explosion accident of a 110 kV porcelain housed MOA. (September 2020) Authors: Li, Qian; Zhou, Zikai; Zhou, Wenqing; Wei, Juntao; Wang, Kai; Liu, Gang; Deng, Honglei; Wang, Peng; Shu, Jian Journal: Engineering failure analysis Issue: Volume 115(2020) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
2. A review of failure modes and fracture analysis of aircraft composite materials. (September 2020) Authors: Zimmermann, Natalie; Wang, Peng Hao Journal: Engineering failure analysis Issue: Volume 115(2020) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
3. A simple approach for evaluating the stress concentration factor of a corroded surface using the fast Fourier transform. (September 2020) Authors: Kim, Hyoung-Seok; Toledo, Kyra Kamille; Jeong, Young-Soo; Kim, In-Tae Journal: Engineering failure analysis Issue: Volume 115(2020) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
4. An analytical model on compressive arch action capacity of 3D beam-column sub-assemblages under failure of one or two adjacent interior columns. (September 2020) Authors: Tavassol, Saeid; Pachenari, Alireza; Mohammadi, Aidin Journal: Engineering failure analysis Issue: Volume 115(2020) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
5. Analysis of fatigue crack propagation in rails under combined action of wheel load and residual stress. (September 2020) Authors: Li, Yang; Chen, Jinjie; Wang, Jianxi; Chen, Long Journal: Engineering failure analysis Issue: Volume 115(2020) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
6. Analysis of ground collapse caused by shield tunnelling and the evaluation of the reinforcement effect on a sand stratum. (September 2020) Authors: Liang, Yu; Chen, Xiangyu; Yang, Junsheng; Zhang, Jian; Huang, Linchong Journal: Engineering failure analysis Issue: Volume 115(2020) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
7. Assessment of fatigue life of a pre-corroded aircraft wing under drag alternating load. (September 2020) Authors: Medina-Pérez, R.O.; García-García, V.; Ponciano-Guzmán, J.N.; Villalobos-Brito, J.C.; Tena-Martínez, J.J. Journal: Engineering failure analysis Issue: Volume 115(2020) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
8. Combined thrust radial bearing of a submarine main shaft – Design and analysis of failure. (September 2020) Authors: Wasilczuk, Michał; Wasilczuk, Filip Journal: Engineering failure analysis Issue: Volume 115(2020) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
9. Contributions for improving the stability of marine power generation plants. (September 2020) Authors: Herrero-Sabat, Antonio; Alvarez-Florez, Jesús; Casals-Torrens, Pau; Bosch-Tous, Ricard; Serrano-Fontova, Alexandre Journal: Engineering failure analysis Issue: Volume 115(2020) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
10. Conveyor belt structure of belt dryer: Analysis and optimization. (September 2020) Authors: Jia, Hepeng; Wu, Kai; Wang, Yu; Sun, Yu Journal: Engineering failure analysis Issue: Volume 115(2020) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗