1. Analysis of the internal stability of coarse granular materials according to various criteria. Issue 8 (13th September 2016) Authors: Andrianatrehina, Livah; Souli, Hanène; Rech, Joël; Taibi, Saïd; Fry, Jean-Jacques; Ding, Lan; Fleureau, Jean-Marie Journal: European journal of environmental and civil engineering Issue: Volume 20:Issue 8(2016) Page Start: 936 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
2. Broaching: Cutting tools and machine tools for manufacturing high quality features in components. Issue 2 (2020) Authors: Arrazola, Pedro J.; Rech, Joël; M'Saoubi, Rachid; Axinte, Dragos Journal: CIRP annals Issue: Volume 69:Issue 2(2020) Page Start: 554 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
3. CFRP drilling: Fundamental study of local feed force and consequences on hole exit damage. (July 2015) Authors: Bonnet, Cédric; Poulachon, Gérard; Rech, Joël; Girard, Yannick; Costes, Jean Philippe Journal: International journal of machine tools & manufacture Issue: Volume 94(2015:Jul.) Page Start: 57 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
4. Characterisation of surface martensite-austenite transformation during finish turning of an AISI S15500 stainless steel. (1st January 2014) Authors: Mondelin, Alexandre; Rech, Joël; Feulvarch, Eric; Coret, Michel Journal: International journal of machining and machinability of materials Issue: Volume 15:Number 1/2(2014) Page Start: 101 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
5. Characteristic assessment and analysis of residual stresses generated by dry belt finishing on hard turned AISI52100. (November 2020) Authors: Wang, Wenxi; Salvatore, Ferdinando; Rech, Joël Journal: Journal of manufacturing processes Issue: Volume 59(2020) Page Start: 11 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
6. Characterization of friction properties at the work material/cutting tool interface during the machining of randomly structured carbon fibers reinforced polymer with Poly Crystalline Diamond tool under dry conditions. (January 2015) Authors: Chardon, Grégory; Klinkova, Olga; Rech, Joël; Drapier, Sylvain; Bergheau, Jean-Michel Journal: Tribology international Issue: Volume 81(2015) Page Start: 300 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
7. Comprehensive investigation on mechanisms of dry belt grinding on AISI52100 hardened steel. (May 2018) Authors: Wang, Wenxi; Salvatore, Ferdinando; Rech, Joël; Li, Jianyong Journal: Tribology international Issue: Volume 121(2018) Page Start: 310 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
8. Determination of the maximum diameter of free fines to assess the internal stability of coarse granular materials. Issue 3 (4th March 2017) Authors: Andrianatrehina, Livah; Souli, Hanène; Rech, Joël; Taibi, Saïd; Fry, Jean-Jacques; Bunieski, Simon; Fleureau, Jean-Marie Journal: European journal of environmental and civil engineering Issue: Volume 21:Issue 3(2017) Page Start: 332 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
9. Effect of abrasive flow machining (AFM) finish of selective laser melting (SLM) internal channels on fatigue performance. (November 2020) Authors: Han, Sangil; Salvatore, Ferdinando; Rech, Joël; Bajolet, Julien; Courbon, Joël Journal: Journal of manufacturing processes Issue: Volume 59(2020) Page Start: 248 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
10. Electromagnetic performance of Ti6Al4V and AlSi7Mg0.6 waveguides with laser beam melting (LBM) produced and abrasive flow machining (AFM) finished internal surfaces. Issue 18 (12th December 2021) Authors: François, Mathieu; Han, Sangil; Segonds, Frédéric; Dupuy, Corinne; Rivette, Mickaël; Turpault, Simon; Mimouna, Mehdi; Salvatore, Ferdinando; Rech, Joël; Peyre, Patrice Journal: Journal of electromagnetic waves and applications Issue: Volume 35:Issue 18(2021) Page Start: 2510 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗