1. Architectural design of MWCNT reinforced AlSi10Mg matrix composites with comprehensive mechanical properties. (June 2021) Authors: Nateq, Behzad; Haddad-Sabzevar, Mohsen; Sajjadi, Seyyed Abdolkarim; Saba, Farhad; Deirmina, Faraz; Pellizzari, Massimo Journal: Composites communications Issue: Volume 25(2021) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
2. Differences of the microstructural evolution of Cu powder during continuous and interrupted mechanical milling. (27th May 2017) Authors: Cipolloni, Giulia; Menapace, Cinzia; Pellizzari, Massimo; Ischia, Gloria Journal: Powder metallurgy Issue: Volume 60:Number 3(2017) Page Start: 232 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
3. Direct Laser Metal Deposition of AISI H13 Cladding on Copper–Beryllium Alloy Substrate Through a Stainless‐Steel Buffer Layer Strategy. Issue 4 (28th August 2022) Authors: Zhao, Zhao; Perini, Matteo; Bosetti, Paolo; Pellizzari, Massimo Other Names: Asnafi Nader guestEditor. Journal: Steel research international Issue: Volume 94:Issue 4(2023) Page Start: n/a Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
4. Direct Laser Metal Deposition of AISI H13 Cladding on Copper–Beryllium Alloy Substrate Through a Stainless‐Steel Buffer Layer Strategy. Issue 4 (3rd April 2023) Authors: Zhao, Zhao; Perini, Matteo; Bosetti, Paolo; Pellizzari, Massimo Other Names: Asnafi Nader guestEditor. Journal: Steel research international Issue: Volume 94:Issue 4(2023) Page Start: n/a Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
5. Effect of cryogenic treatment on the hardness and tensile behaviour of AISI 4140 steel. (10th November 2011) Authors: Senthilkumar, D.; Rajendran, I.; Pellizzari, Massimo Journal: International journal of microstructure and materials properties Issue: Volume 6:Number 5(2011) Page Start: 366 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
6. Effects of building direction and defect sensitivity on the fatigue behavior of additively manufactured H13 tool steel. (August 2020) Authors: Pellizzari, Massimo; AlMangour, Bandar; Benedetti, Matteo; Furlani, Sebastiano; Grzesiak, Dariusz; Deirmina, Faraz Journal: Theoretical and applied fracture mechanics Issue: Volume 108(2020) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
7. Fracture Toughness of a Hot Work Tool Steel Fabricated by Laser‐Powder Bed Fusion Additive Manufacturing. Issue 5 (21st November 2019) Authors: Pellizzari, Massimo; Furlani, Sebastiano; Deirmina, Faraz; Siriki, Raveendra; AlMangour, Bandar; Grzesiak, Dariusz Other Names: Broeckmann Christoph guestEditor. Journal: Steel research international Issue: Volume 91:Issue 5(2020) Page Start: n/a Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
8. H13–partially stabilized zirconia nanocomposites fabricated by high-energy mechanical milling and selective laser melting. (15th May 2018) Authors: Deirmina, Faraz; AlMangour, Bandar; Grzesiak, Dariusz; Pellizzari, Massimo Journal: Materials & design Issue: Volume 146(2018) Page Start: 286 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
9. Polymer-derived silicon nitride aerogels as shape stabilizers for low and high-temperature thermal energy storage. Issue 11 (September 2021) Authors: Zambotti, Andrea; Caldesi, Edoardo; Pellizzari, Massimo; Valentini, Francesco; Pegoretti, Alessandro; Dorigato, Andrea; Speranza, Giorgio; Chen, Kan; Bortolotti, Mauro; Sorarù, Gian D.; Biesuz, Mattia Journal: Journal of the European Ceramic Society Issue: Volume 41:Issue 11(2021) Page Start: 5484 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
10. Powder metallurgy opens new ways for tool steels. (2017) Authors: Pellizzari, Massimo; Deirmina, Faraz Journal: International journal of microstructure and materials properties Issue: Volume 12:Number 3/4(2017) Page Start: 250 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗