1. A new approach for determining the R-curve in DCB tests without optical measurements. (February 2015) Authors: De Gracia, J.; Boyano, A.; Arrese, A.; Mujika, F. Journal: Engineering fracture mechanics Issue: Volume 135(2015) Page Start: 274 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
2. A novel experimental procedure to determine the cohesive law in ENF tests. (20th January 2019) Authors: Arrese, A.; Insausti, N.; Mujika, F.; Perez-Galmés, M.; Renart, J. Journal: Composites science and technology Issue: Volume 170(2019) Page Start: 42 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
3. Analysis of a reversible five-point bending configuration based on a novel two-sense support. (May 2015) Authors: Mujika, F.; Asensio, M.; Vargas, G.; Boyano, A.; De Gracia, J. Journal: Polymer testing Issue: Volume 43(2015:May) Page Start: 108 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
4. Analysis of DCB test of angle-ply laminates including bending-twisting coupling. (15th April 2018) Authors: De Gracia, J.; Boyano, A.; Arrese, A.; Mujika, F. Journal: Composite structures Issue: Volume 190(2018) Page Start: 169 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
5. Analysis of displacement path dependence in mixed mode cohesive law. (December 2022) Authors: Arrese, A.; Mujika, F.; Renart, J.; Sarrado, C. Journal: Engineering fracture mechanics Issue: Volume 276:Part A(2022) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
6. Analysis of the DCB test of angle-ply laminates including residual stresses. (April 2018) Authors: De Gracia, J.; Boyano, A.; Arrese, A.; Mujika, F. Journal: Theoretical and applied fracture mechanics Issue: Volume 94(2018) Page Start: 197 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
7. Analysis of the DCB test of angle-ply laminates including residual stresses. (April 2018) Authors: De Gracia, J.; Boyano, A.; Arrese, A.; Mujika, F. Journal: Theoretical and applied fracture mechanics Issue: Volume 94(2018) Page Start: 197 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
8. Analytical and numerical approach of an End Notched Flexure test configuration with an inserted roller for promoting mixed mode I/II. (July 2015) Authors: Boyano, A.; Mollón, V.; Bonhomme, J.; De Gracia, J.; Arrese, A.; Mujika, F. Journal: Engineering fracture mechanics Issue: Volume 143(2015) Page Start: 63 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
9. Equivalent energy release rate and crack stability in the End Notched Flexure with inserted roller mixed mode I/II test. (February 2017) Authors: Boyano, A.; De Gracia, J.; Arrese, A.; Mujika, F. Journal: Theoretical and applied fracture mechanics Issue: Volume 87(2017) Page Start: 99 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
10. Experimental assessment of an End Notched Flexure test configuration with an inserted roller for analyzing mixed-mode I/II fracture toughness. (September 2016) Authors: Boyano, A.; De Gracia, J.; Arrese, A.; Mujika, F. Journal: Engineering fracture mechanics Issue: Volume 163(2016) Page Start: 462 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗