1. A densification equation derived from the stress-deformation analysis of uniaxial cold compaction of metal powder mixes. (27th May 2018) Authors: Molinari, Alberto; Cristofolini, Ilaria; Pederzini, Gianluca; Rambelli, Alex Journal: Powder metallurgy Issue: Volume 61:Number 3(2018) Page Start: 210 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
2. Correlation between as‐designed and as‐built Young's modulus of cubic regular, cubic irregular, and trabecular cellular materials. Issue 5 (28th June 2021) Authors: Raghavendra, Sunil; Molinari, Alberto; Zappini, Gianluca; Benedetti, Matteo Journal: Material design & processing communications Issue: Volume 3:Issue 5(2021) Page Start: n/a Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
3. Damage phenomena in lubricated rolling-sliding wear of a gas carburised 0.85%Mo low-alloyed sintered steel: theoretical analysis and experimental verification. (20th October 2017) Authors: Tesfaye, Samuel; Molinari, Alberto; Pahl, Wolfgang Journal: Powder metallurgy Issue: Volume 60:Number 5(2017) Page Start: 321 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
4. Development of a new model describing the anisotropic dimensional change on sintering. (15th March 2022) Authors: Cristofolini, Ilaria; Molinari, Alberto; Zago, Marco; Uçak, Onur Utku; Vicenzi, Bruno; Dougan, Mark James; Schneider, Markus; Pedersen, Preben Hedegard; Bolitschek, Johanna; Voglhuber, Juergen Journal: Powder metallurgy Issue: Volume 65:Number 2(2022) Page Start: 89 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
5. Effect of geometry and green density on the anisotropic sintering shrinkage of axisymmetric iron parts. (8th August 2018) Authors: Molinari, Alberto; Amirabdollahian, Sasan; Zago, Marco; Larsson, Mats; Cristofolini, Ilaria Journal: Powder metallurgy Issue: Volume 61:Number 4(2018) Page Start: 267 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
6. Effect of pressure on the electrical resistance flash sintering of tungsten carbide. Issue 5 (May 2022) Authors: Mazo, Isacco; Molinari, Alberto; Sglavo, Vincenzo M. Journal: Journal of the European Ceramic Society Issue: Volume 42:Issue 5(2022) Page Start: 2028 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
7. Effect of strut cross section and strut defect on tensile properties of cubic cellular structure. Issue 5 (29th December 2019) Authors: Raghavendra, Sunil; Molinari, Alberto; Fontanari, Vigilio; Dallago, Michele; Luchin, Valerio; Zappini, Gianluca; Benedetti, Matteo Journal: Material design & processing communications Issue: Volume 2:Issue 5(2020) Page Start: n/a Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
8. Electrical resistance flash sintering of tungsten carbide. (January 2022) Authors: Mazo, Isacco; Molinari, Alberto; Sglavo, Vincenzo M. Journal: Materials & design Issue: Volume 213(2022) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
9. From experimental data, the mechanics relationships describing the behaviour of four different low alloyed steel powders during uniaxial cold compaction. (1st January 2018) Authors: Cristofolini, Ilaria; Molinari, Alberto; Pederzini, Gianluca; Rambelli, Alex Journal: Powder metallurgy Issue: Volume 61:Number 1(2018) Page Start: 10 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
10. Influence of die wall lubrication on tensile properties of high temperature sintered and sinterhardened low alloy steel. (7th August 2020) Authors: Toledo dos Santos, Daniel; Zadra, Mario; Girardini, Luca; Albonetti, Pietro; Bordin, Stefano; Molinari, Alberto Journal: Powder metallurgy Issue: Volume 63:Number 4(2020) Page Start: 268 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗