1. Anneal hardening and elevated temperature strain rate sensitivity of nanostructured metals: Their relation to intergranular dislocation accommodation. (15th February 2019) Authors: Renk, O.; Maier-Kiener, V.; Issa, I.; Li, J.H.; Kiener, D.; Pippan, R. Journal: Acta materialia Issue: Volume 165(2019) Page Start: 409 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
2. Assessment of grain boundary cohesion of technically pure and boron micro-doped molybdenum via meso-scale three-point-bending experiments. (September 2021) Authors: Jakob, S.; Hohenwarter, A.; Lorich, A.; Knabl, W.; Pippan, R.; Clemens, H.; Maier-Kiener, V. Journal: Materials & design Issue: Volume 207(2021) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
3. Deformation behavior of aluminum pillars produced by Xe and Ga focused ion beams: Insights from strain rate jump tests. (5th November 2019) Authors: Xiao, Y.; Maier-Kiener, V.; Michler, J.; Spolenak, R.; Wheeler, J.M. Journal: Materials & design Issue: Volume 181(2019) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
4. Deformation in the γ-Mg17Al12 phase at 25–278 °C. (July 2016) Authors: Mathur, H.N.; Maier-Kiener, V.; Korte-Kerzel, S. Journal: Acta materialia Issue: Volume 113(2016) Page Start: 221 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
5. Deformation in the γ-Mg17Al12 phase at 25–278 °C. (July 2016) Authors: Mathur, H.N.; Maier-Kiener, V.; Korte-Kerzel, S. Journal: Acta materialia Issue: Volume 113(2016) Page Start: 221 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
6. Dominating deformation mechanisms in ultrafine-grained chromium across length scales and temperatures. (November 2017) Authors: Fritz, R.; Wimler, D.; Leitner, A.; Maier-Kiener, V.; Kiener, D. Journal: Acta materialia Issue: Volume 140(2017) Page Start: 176 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
7. Dynamic nanoindentation testing: is there an influence on a material's hardness?. Issue 7 (3rd November 2017) Authors: Leitner, A.; Maier-Kiener, V.; Kiener, D. Journal: Materials research letters Issue: Volume 5:Issue 7(2017) Page Start: 486 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
8. Effect of boron doping on grain boundary cohesion in technically pure molybdenum investigated via meso-scale three-point-bending tests. (June 2023) Authors: Jakob, S.; Hohenwarter, A.; Lorich, A.; Knabl, W.; Pippan, R.; Clemens, H.; Maier-Kiener, V. Journal: International journal of refractory metals & hard materials Issue: Volume 113(2023) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
9. Essential refinements of spherical nanoindentation protocols for the reliable determination of mechanical flow curves. (15th May 2018) Authors: Leitner, A.; Maier-Kiener, V.; Kiener, D. Journal: Materials & design Issue: Volume 146(2018) Page Start: 69 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
10. Evolution of nano-pores during annealing of technically pure molybdenum sheet produced from different sintered formats. (January 2023) Authors: Jakob, S.; Lorich, A.; Knabl, W.; Stark, A.; Staron, P.; Clemens, H.; Spoerk-Erdely, P.; Maier-Kiener, V. Journal: International journal of refractory metals & hard materials Issue: Volume 110(2023) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗