1. Anisotropy of fracture toughness in nanostructured ceramics controlled by grain boundary design. (5th January 2019) Authors: Daniel, Rostislav; Meindlhumer, Michael; Baumegger, Walter; Todt, Juraj; Zalesak, Jakub; Ziegelwanger, Tobias; Mitterer, Christian; Keckes, Jozef Journal: Materials & design Issue: Volume 161(2019) Page Start: 80 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
2. Axially and radially inhomogeneous swelling in commercial 18650 Li-ion battery cells. (15th August 2022) Authors: Blazek, Pavel; Westenberger, Peter; Erker, Simon; Brinek, Adam; Zikmund, Tomas; Rettenwander, Daniel; Wagner, Nils Peter; Keckes, Jozef; Kaiser, Jozef; Kazda, Tomas; Vyroubal, Petr; Macak, Martin; Todt, Juraj Journal: Journal of energy storage Issue: Volume 52:Part B(2022) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
3. Biomimetic hard and tough nanoceramic Ti–Al–N film with self-assembled six-level hierarchy. Issue 16 (10th April 2019) Authors: Meindlhumer, Michael; Zalesak, Jakub; Pitonak, Reinhard; Todt, Juraj; Sartory, Bernhard; Burghammer, Manfred; Stark, Andreas; Schell, Norbert; Daniel, Rostislav; Keckes, Julius F.; Lessiak, Mario; Köpf, Arno; Weißenbacher, Ronald; Keckes, Jozef Journal: Nanoscale Issue: Volume 11:Issue 16(2019) Page Start: 7986 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
4. Combining hardness measurements of a heat-treated crankshaft bearing with cross-sectional residual stress and retained austenite distributions measured by HEXRD. (December 2022) Authors: Mevec, Daniel G.; Jászfi, Vince; Prevedel, Petri; Todt, Juraj; Maawad, Emad; Keckes, Jozef; Raninger, Peter Journal: Materials today communications Issue: Volume 33(2022) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
5. Complementary High Spatial Resolution Methods in Materials Science and Engineering2 . Issue 4 (31st January 2017) Authors: Paris, Oskar; Lang, David; Li, Jiehua; Schumacher, Peter; Deluca, Marco; Daniel, Rostislav; Tkadletz, Michael; Schalk, Nina; Mitterer, Christian; Todt, Juraj; Keckes, Jozef; Zhang, Zaoli; Fritz‐Popovski, Gerhard; Ganser, Christian; Teichert, Christian; Clemens, Helmut Other Names: Clemens Helmut guestEditor.; Eckert Jürgen guestEditor.; Mitterer Christian guestEditor.; Schuecker Clara guestEditor. Journal: Advanced engineering materials Issue: Volume 19:Issue 4(2017) Page Start: n/a Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
6. Cracking mechanism in a laser powder bed fused cold-work tool steel: The role of residual stresses, microstructure and local elemental concentrations. (15th February 2022) Authors: Platl, Jan; Bodner, Sabine; Hofer, Christina; Landefeld, Andreas; Leitner, Harald; Turk, Christoph; Nielsen, Marc-André; Demir, Ali Gökhan; Previtali, Barbara; Keckes, Jozef; Schnitzer, Ronald Journal: Acta materialia Issue: Volume 225(2022) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
7. Cross-sectional characterization techniques as the basis for knowledge-based design of graded CVD TiN-TiB2 coatings. (February 2018) Authors: Tkadletz, Michael; Schalk, Nina; Mitterer, Christian; Keckes, Jozef; Pohler, Markus; Czettl, Christoph Journal: International journal of refractory metals & hard materials Issue: Volume 71(2018) Page Start: 280 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
8. Curvature determination of embedded silicon chips by in situ rocking curve X-ray diffraction measurements at elevated temperatures. Issue 4 (28th September 2016) Authors: Angerer, Paul; Schöngrundner, Ronald; Macurova, Katerina; Wiessner, Manfred; Keckes, Jozef Journal: Powder diffraction Issue: Volume 31:Issue 4(2016) Page Start: 267 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
9. Electrically conductive kraft lignin-based carbon filler for polymers. (August 2015) Authors: Gindl-Altmutter, Wolfgang; Fürst, Christian; Mahendran, Arunjunai raj; Obersriebnig, Michael; Emsenhuber, Gerhard; Kluge, Marcel; Veigel, Stefan; Keckes, Jozef; Liebner, Falk Journal: Carbon Issue: Volume 89(2015) Page Start: 161 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
10. Electrically conductive kraft lignin-based carbon filler for polymers. (August 2015) Authors: Gindl-Altmutter, Wolfgang; Fürst, Christian; Mahendran, Arunjunai raj; Obersriebnig, Michael; Emsenhuber, Gerhard; Kluge, Marcel; Veigel, Stefan; Keckes, Jozef; Liebner, Falk Journal: Carbon Issue: Volume 89(2015) Page Start: 161 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗