1. A new mechanism of thermal sensitivity for rapid drug release and low systemic toxicity in hyperthermia and thermal ablation temperature ranges. (June 2015) Authors: Dabbagh, Ali; Abdullah, Basri Johan Jeet; Abu Kasim, Noor Hayaty; Abdullah, Hadijah; Hamdi, Mohd Journal: International journal of hyperthermia Issue: Volume 31:Number 4(2015) Page Start: 375 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
2. Brazing Diamond Grits Onto Stainless Steel using Active Filler Metal and Porous Nickel as an Interlayer: Analysis of the Porous Nickel/Stainless Steel Interface. (February 2019) Authors: Zaharinie, Tuan; Aliff, Amirul; Hamdi, Mohd; Ariga, Tadashi Journal: IOP conference series Issue: Volume 473(2019) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
3. Design of a novel creep testing machine to investigate the creep life history of austenitic steel foil at elevated temperature. Issue 9 (4th July 2022) Authors: Farokhi Nejad, Ali; Mohammed K. AL‐Fatlwe, Fatima; Rahimian Koloor, Seyed Saeid; Alipour, Roozbeh; Davoudi, Mohammadmahdi; Hamdi, Mohd; Tamin, Mohd Nasir Journal: Fatigue & fracture of engineering materials & structures Issue: Volume 45:Issue 9(2022) Page Start: 2563 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
4. Intermetallic compounds in 3D integrated circuits technology: a brief review. Issue 1 (31st December 2017) Authors: Annuar, Syahira; Mahmoodian, Reza; Hamdi, Mohd; Tu, King-Ning Journal: Science and technology of advanced materials Issue: Volume 18:Issue 1(2017) Page Start: 693 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
5. Low-melting-point polymeric nanoshells for thermal-triggered drug release under hyperthermia condition. (17th November 2015) Authors: Dabbagh, Ali; Mahmoodian, Reza; Abdullah, Basri Johan Jeet; Abdullah, Hadijah; Hamdi, Mohd; Abu Kasim, Noor Hayaty Journal: International journal of hyperthermia Issue: Volume 31:Number 8(2015) Page Start: 920 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
6. Optimization of cutting conditions for minimum residual stress, cutting force and surface roughness in end milling of S50C medium carbon steel. (May 2016) Authors: Masmiati, Nik; Sarhan, Ahmed A.D.; Hassan, Mohsen Abdel Naeim; Hamdi, Mohd Journal: Measurement Issue: Volume 86(2016:May.) Page Start: 253 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
7. Optimization of cutting conditions for minimum residual stress, cutting force and surface roughness in end milling of S50C medium carbon steel. (May 2016) Authors: Masmiati, Nik; Sarhan, Ahmed A.D.; Hassan, Mohsen Abdel Naeim; Hamdi, Mohd Journal: Measurement Issue: Volume 86(2016:May.) Page Start: 253 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
8. Physico-chemical and antimicrobial properties of Ag/Ta2O5 nanocomposite coatings. Issue 17 (1st September 2021) Authors: Alias, Rodianah; Rizwan, Muhammad; Mahmoodian, Reza; Vellasamy, K.M.; Hamdi, Mohd Journal: Ceramics international Issue: Volume 47:Issue 17(2021) Page Start: 24139 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
9. Surface modification of valve metals using plasma electrolytic oxidation for antibacterial applications: A review. Issue 2 (30th October 2017) Authors: Rizwan, Muhammad; Alias, Rodianah; Zaidi, Umi Zhalilah; Mahmoodian, Reza; Hamdi, Mohd Journal: Journal of biomedical materials research Issue: Volume 106:Issue 2(2018) Page Start: 590 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
10. Synthesis and characterisation of floatable magnesium alloy syntactic foams with hybridised cell morphology. (15th December 2018) Authors: Akinwekomi, Akeem Damilola; Tang, Chak-Yin; Tsui, Gary Chi-Pong; Law, Wing-Cheung; Chen, Ling; Yang, Xu-Sheng; Hamdi, Mohd Journal: Materials & design Issue: Volume 160(2018) Page Start: 591 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗