1. Analysis of temperature and strain rate dependencies of softening regime for tempered martensitic steel. (May 2017) Authors: Eisenträger, Johanna; Naumenko, Konstantin; Altenbach, Holm; Gariboldi, Elisabetta Journal: Journal of strain analysis for engineering design Issue: Volume 52:Number 4(2017) Page Start: 226 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
2. Ball-milled Al–Sn alloy as composite Phase Change Material. (September 2020) Authors: Confalonieri, Chiara; Grimaldi, Aldo Tommaso; Gariboldi, Elisabetta Journal: Materials today energy Issue: Volume 17(2020) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
3. Characterization of localized corrosion of heat treated Er‐ and Zr‐containing A356 alloys in 3.5 wt% NaCl aqueous solution. Issue 2 (24th August 2018) Authors: Colombo, Marco; Buzolin, Ricardo H.; Gariboldi, Elisabetta; Vallant, Rudolf; Sommitsch, Christof Journal: Materials and corrosion Issue: Volume 70:Issue 2(2019) Page Start: 246 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
4. Conditions for blister formation during thermal cycles of Al–Si–Cu–Fe alloys for high pressure die-casting. (15th February 2016) Authors: Ozhoga-Maslovskaja, Oksana; Gariboldi, Elisabetta; Lemke, Jannis Nicolas Journal: Materials & design Issue: Volume 92(2016) Page Start: 151 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
5. Conditions for blister formation during thermal cycles of Al–Si–Cu–Fe alloys for high pressure die-casting. (15th February 2016) Authors: Ozhoga-Maslovskaja, Oksana; Gariboldi, Elisabetta; Lemke, Jannis Nicolas Journal: Materials & design Issue: Volume 92(2016) Page Start: 151 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
6. Conditions for blister formation during thermal cycles of Al–Si–Cu–Fe alloys for high pressure die-casting. (15th February 2016) Authors: Ozhoga-Maslovskaja, Oksana; Gariboldi, Elisabetta; Lemke, Jannis Nicolas Journal: Materials & design Issue: Volume 92(2016) Page Start: 151 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
7. Creep damage behaviour of Al6061-Al<SUB align=right><SMALL>2</small></sub>O<SUB align=right><SMALL>3</small></sub> particulate composites. (1st January 2002) Authors: Vedani, Maurizio; Gariboldi, Elisabetta Journal: International journal of material & product technology Issue: Volume 17:Number 3/4(2002) Page Start: 243 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
8. Creep damage behaviour of Al6061-Al2O3 particulate composites. (1st January 2002) Authors: Vedani, Maurizio; Gariboldi, Elisabetta Journal: International journal of material & product technology Issue: Volume 17:Number 3/4(2002) Page Start: 243 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
9. Effective thermal conductivity in BCC and FCC lattices for all volume fractions and conductivity ratios: Analyses by microstructural efficiency and morphology factor and analytic models. (December 2022) Authors: Gariboldi, Elisabetta; Li, Ziwei; Rawson, Anthony J. Journal: Materials today communications Issue: Volume 33(2022) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
10. Experimental analysis and constitutive modeling of anisotropic creep damage in a wrought age-hardenable Al alloy. (January 2022) Authors: Naumenko, Konstantin; Gariboldi, Elisabetta Journal: Engineering fracture mechanics Issue: Volume 259(2022) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗