1. Effect of the Engagement Ratio and of Temperature on the Shear Strength of Epoxy Adhesive Bonded Aluminum Alloy Pin-and-Collar Joints. Issue 11 (19th September 2018) Authors: Croccolo, D.; De Agostinis, M.; Fini, S.; Olmi, G. Journal: Journal of adhesion Issue: Volume 94:Issue 11(2018) Page Start: 932 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
2. Effects of aging temperature and humidity on the response of medium and high strength threadlockers. Issue 6 (26th April 2022) Authors: Croccolo, D.; De Agostinis, M.; Fini, S.; Olmi, G.; Paiardini, L.; Robusto, F. Journal: Journal of adhesion Issue: Volume 98:Issue 6(2022) Page Start: 721 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
3. Fretting fatigue of interference fitted joints: development of a novel specimen for four-point rotating-bending tests and experimental results. (February 2023) Authors: Croccolo, D.; De Agostinis, M.; Fini, S.; Olmi, G.; Paiardini, L.; Robusto, F.; Scapecchi, C. Journal: Engineering failure analysis Issue: Volume 144(2023) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
4. Influence of the build orientation on the fatigue strength of EOS maraging steel produced by additive metal machine. Issue 5 (3rd February 2016) Authors: Croccolo, D.; De Agostinis, M.; Fini, S.; Olmi, G.; Vranic, A.; Ciric‐Kostic, S. Journal: Fatigue & fracture of engineering materials & structures Issue: Volume 39:Issue 5(2016:May) Page Start: 637 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
5. Influence of the interference level and of the assembly process on the shear strength of loctite 648 anaerobic adhesive. Issue 1 (11th March 2020) Authors: Croccolo, D.; De Agostinis, M.; Fini, S.; Olmi, G.; Paiardini, L.; Robusto, F. Journal: Journal of adhesion Issue: Volume 96:Issue 1/4(2020) Page Start: 90 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
6. Interference fit effect on improving fatigue life of a holed single plate. Issue 7 (19th March 2013) Authors: Croccolo, D.; De Agostinis, M.; Ceschini, L.; Morri, A.; Marconi, A. Journal: Fatigue & fracture of engineering materials & structures Issue: Volume 36:Issue 7(2013:Jul.) Page Start: 689 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
7. On the impact strength of adhesive bonded pin-and-collar joints. (February 2023) Authors: Brugo, T.M.; Croccolo, D.; De Agostinis, M.; Fini, S.; Olmi, G.; Zucchelli, A. Journal: International journal of adhesion & adhesives Issue: Volume 122(2023) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
8. Temperature response of LOCTITE 648 anaerobic adhesive and hoop channels to enhance its effectiveness under high interference. Issue 16 (10th December 2022) Authors: Croccolo, D.; De Agostinis, M.; Fini, S.; Olmi, G.; Paiardini, L.; Robusto, F. Journal: Journal of adhesion Issue: Volume 98:Issue 16(2022) Page Start: 2618 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
9. Threaded fasteners with applied medium or high strength threadlockers: effect of different tightening procedures on the tribological response. Issue 1 (11th March 2020) Authors: Croccolo, D.; De Agostinis, M.; Fini, S.; Olmi, G.; Paiardini, L.; Robusto, F. Journal: Journal of adhesion Issue: Volume 96:Issue 1/4(2020) Page Start: 64 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗