Interference fit effect on improving fatigue life of a holed single plate. Issue 7 (19th March 2013)

• Record Type: Journal Article
• Authors: Croccolo, D.; De Agostinis, M.; Ceschini, L.; Morri, A.; Marconi, A.
• Is Part Of: Fatigue & fracture of engineering materials & structures. Volume 36:Issue 7(2013:Jul.)
• Page Start: 689
• Page End: 698
• Publication Date: 2013-03-19
• Subjects: Materials -- Fatigue -- Periodicals; Fracture mechanics -- Periodicals; 620.1123
• DOI: 10.1111/ffe.12039
• Languages: English
• ISSNs: 8756-758X

Abstract

<abstract abstract-type="main"> <title>ABSTRACT</title> <p>This paper deals with the influence of interference fit coupling on the fatigue strength of holed plates made of a medium‐carbon forging steel (35 KB2), heat treated by quenching followed by tempering, up to a hardness of about 350 BH, obtaining a sorbitic microstructure. Tensile and impact tests showed an ultimate tensile strength of about 1100 MPa, a yield strength of about 1000 MPa, an elongation to failure of 15% and an impact toughness KV of 43 J at room temperature. Axial fatigue tests were performed on holed specimens with or without a pin, made of the same material, press fitted and still left into their central hole. The tension–tension fatigue tests have been performed with a stress ratio <italic>R</italic> = 0.1. The effect on fatigue strength was investigated both experimentally and numerically. Three different conditions were investigated by using open hole specimens, specimens with 0.6% of nominal specific interference and specimens with 2% of nominal specific interference. The experimental stress‐life (S–N) curves pointed out an increased fatigue life of the interference fit specimens, compared with the open hole ones. The numerical investigation was performed in order to analyse the stress field by applying an elastic plastic 2D simulation, with commercial finite element software. The stress history and distribution around the interference‐fitted hole indicate a significant reduction of the stress amplitude produced by the external loading (remote stress) because a residual and compressive stress field is generated by the pin insertion.</p> </abstract>