1. A comparative investigation into the influence of the constitutive model on the prediction of in-plane formability for Nakazima and Marciniak tests. (November 2019) Authors: Noder, J.; Butcher, C. Journal: International journal of mechanical sciences Issue: Volume 163(2019) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
2. Accounting for Shear Anisotropy and Material Frame Rotation on the Constitutive Characterization of Automotive Alloys using Simple Shear Tests. (September 2020) Authors: Abedini, A.; Noder, J.; Kohar, C.P.; Butcher, C. Journal: Mechanics of materials Issue: Volume 148(2020) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
3. Constitutive characterization of a rare-earth magnesium alloy sheet (ZEK100-O) in shear loading: Studies of anisotropy and rate sensitivity. (August 2017) Authors: Abedini, A.; Butcher, C.; Nemcko, M.J.; Kurukuri, S.; Worswick, M.J. Journal: International journal of mechanical sciences Issue: Volume 128/129(2017) Page Start: 54 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
4. Effect of strain rate on flow stress and anisotropy of DP600, TRIP780, and AA5182-O sheet metal alloys. (February 2016) Authors: Rahmaan, T.; Bardelcik, A.; Imbert, J.; Butcher, C.; Worswick, M.J. Journal: International journal of impact engineering Issue: Volume 88(2016:Feb.) Page Start: 72 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
5. Evaluation and calibration of anisotropic yield criteria in shear Loading: Constraints to eliminate numerical artefacts. (15th October 2018) Authors: Abedini, A.; Butcher, C.; Rahmaan, T.; Worswick, M.J. Journal: International journal of solids and structures Issue: Volume 151(2018) Page Start: 118 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
6. Experimental fracture characterisation of an anisotropic magnesium alloy sheet in proportional and non-proportional loading conditions. (July 2018) Authors: Abedini, A.; Butcher, C.; Worswick, M.J. Journal: International journal of solids and structures Issue: Volume 144/145(2018) Page Start: 1 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
7. Experimental stress state-dependent void nucleation behavior for advanced high strength steels. (1st August 2020) Authors: Pathak, N.; Adrien, J.; Butcher, C.; Maire, E.; Worswick, M. Journal: International journal of mechanical sciences Issue: Volume 179(2020) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
8. Failure parameter identification and validation for a dual-phase 780 steel sheet. (1st October 2017) Authors: Anderson, D.; Butcher, C.; Pathak, N.; Worswick, M.J. Journal: International journal of solids and structures Issue: Volume 124(2017) Page Start: 89 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
9. Influence of loading orientation on mechanical properties of spot welds. (15th June 2022) Authors: Shojaee, M.; Tolton, C.; Midawi, A.R.H.; Butcher, C.; Ghassemi-Armaki, H.; Worswick, M.; Biro, E. Journal: International journal of mechanical sciences Issue: Volume 224(2022) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
10. Micromechanical modelling of edge failure in 800 MPa advanced high strength steels. (April 2020) Authors: Pathak, N.; Butcher, C.; Adrien, J.; Maire, E.; Worswick, M. Journal: Journal of the mechanics and physics of solids Issue: Volume 137(2020) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗