1. Assessment of failure and cohesive zone length in co-consolidated hybrid C/PEKK butt joint. (1st August 2018) Authors: Baran, Ismet; Warnet, Laurent L.; Akkerman, Remko Journal: Engineering structures Issue: Volume 168(2018) Page Start: 420 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
2. Investigation of transverse residual stresses in a thick pultruded composite using digital image correlation with hole drilling. (1st September 2019) Authors: Yuksel, Onur; Baran, Ismet; Ersoy, Nuri; Akkerman, Remko Journal: Composite structures Issue: Volume 223(2019) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
3. Evaluation of insert design on the performance of repaired composite-Ti alloy joints. (15th December 2019) Authors: Zhu, Yun-tao; Akkerman, Remko; Xiong, Jun-jiang; Luo, Chu-yang; Du, Yi-sen Journal: Composite structures Issue: Volume 230(2019) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
4. New analytical and numerical optical model for the laser assisted tape winding process. (April 2018) Authors: Reichardt, Jasper; Baran, Ismet; Akkerman, Remko Journal: Composites Issue: Volume 107(2018) Page Start: 647 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
5. Ultrasonic inline inspection of a cement-based drinking water pipeline. (1st May 2020) Authors: Hernandez Delgadillo, Hector; Geelen, Caspar; Kakes, Rutger; Loendersloot, Richard; Yntema, Doekle; Tinga, Tiedo; Akkerman, Remko Journal: Engineering structures Issue: Volume 210(2020) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
6. Editorial. (October 2015) Authors: Akkerman, Remko Journal: Composites Issue: Volume 77(2015) Page Start: 237 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
7. Temperature variation during continuous laser-assisted adjacent hoop winding of type-IV pressure vessels: An experimental analysis. (June 2020) Authors: Zaami, Amin; Schäkel, Martin; Baran, Ismet; Bor, Ton C; Janssen, Henning; Akkerman, Remko Journal: Journal of composite materials Issue: Volume 54:Number 13(2020) Page Start: 1717 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
8. Simulating the induction heating of cross-ply C/PEKK laminates – sensitivity and effect of material variability. (3rd September 2021) Authors: Grouve, Wouter J. B.; Sacchetti, Francisco; Vruggink, Evan J.; Akkerman, Remko Journal: Advanced composite materials Issue: Volume 30:Number 5(2021) Page Start: 409 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
9. A new global kinematic-optical-thermal process model for laser-assisted tape winding with an application to helical-wound pressure vessel. (August 2020) Authors: Hosseini, S.M. Amin; Schäkel, Martin; Baran, Ismet; Janssen, Henning; van Drongelen, Martin; Akkerman, Remko Journal: Materials & design Issue: Volume 193(2020) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
10. A fully coupled local and global optical-thermal model for continuous adjacent laser-assisted tape winding process of type-IV pressure vessels. (April 2021) Authors: Zaami, Amin; Schäkel, Martin; Baran, Ismet; Bor, Ton C; Janssen, Henning; Akkerman, Remko Journal: Journal of composite materials Issue: Volume 55:Number 8(2021) Page Start: 1073 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗