Direct Microtip Focused Electrohydrodynamic Jet Printing of Tailored Microlens Arrays on PDMS Nanofilm‐Modified Substrate. Issue 11 (14th July 2021)

• Record Type: Journal Article
• Authors: Su, Shijie; Liang, Junsheng; Li, Xiaojian; Xin, Wenwen; Chen, Li; Yin, Penghe; Wang, Zizhu; Ye, Xushi; Xiao, Jianping; Wang, Dazhi
• Is Part Of: Advanced materials technologies. Volume 6:Issue 11(2021)
• Page Start: n/a
• Page End: n/a
• Publication Date: 2021-07-14
• Subjects: electrohydrodynamic jet printing -- microlens arrays -- PDMS nanofilm -- tailored; Materials science -- Periodicals; Technological innovations -- Periodicals; Materials science; Technological innovations; Periodicals; 620.1105
• DOI: 10.1002/admt.202100449
• Languages: English
• ISSNs: 2365-709X

Abstract

Abstract: Microlens arrays (MLAs) have been widely employed as key components of various functional devices. However, the high‐efficiency fabrication of tailored MLAs with high numerical aperture (NA) is still a challenge. Herein, a one‐step maskless fabrication method of MLAs on polydimethylsiloxane (PDMS) nanofilm modified substrate via microtip focused electrohydrodynamic jet (MFEJ) printing is developed. The MFEJ printing can effectively avoid nozzle blockage even with highly viscous UV‐curable polymer. The contact angle (CA) of polymer can be controlled on different hydrophobic substrates, which are modified by treatment with PDMS, and MLAs with different NA can be realized. The polymer CA increases from 19° to 73° after surface modification, and the NA of MLAs correspondingly increases from 0.18 to 0.53. The MLAs diameter and focusing properties can be easily tuned by combining the printing parameters with PDMS nanofilm modification. Various patterns of MLAs with high NA are obtained by MFEJ printing. The projection experiment indicates the uniformity and excellent optical performance of the MLAs. Moreover, the fabricated MLAs can generate magnified virtual images with a magnification up to 1.72‐fold. Results show that the MFEJ printing can fabricate functional and tailored MLAs with high NA on the PDMS nanofilm‐modified substrate. Abstract : A one‐step maskless fabrication method of microlens arrays (MLAs) on polydimethylsiloxane (PDMS) nanofilm modified substrate via microtip focused electrohydrodynamic jet (MFEJ) printing is developed. The MFEJ printing can fabricate functional and tailored MLAs with high numerical aperture (NA) on the PDMS nanofilm‐modified substrate. The fabricated MLAs can generate magnified virtual images with a magnification up to 1.72‐fold.