Critical effect of heat input on joint quality in resistance element welding of Al and steel. (9th June 2023)

• Record Type: Journal Article
• Authors: Karim, Md Abdul; Manladan, Sunusi Marwana; Afroz, Hasan M.M.; Jin, Woosung; Krishna, Tejaswin; Ji, Changwook; Kim, Duck Bong; Park, Yeong-Do
• Is Part Of: Journal of manufacturing processes. Volume 95(2023)
• Page Start: 91
• Page End: 104
• Publication Date: 2023-06-09
• Subjects: Resistance element welding -- Heat input -- Steel -- Aluminum -- Joint -- Strength; Production management -- Data processing -- Periodicals; Manufacturing processes -- Periodicals; Procestechnologie; Productietechniek; Production -- Gestion -- Informatique -- Périodiques; Fabrication -- Périodiques; Manufacturing processes; Production management -- Data processing; Periodicals; 670.5
• DOI: 10.1016/j.jmapro.2023.04.005
• Languages: English
• ISSNs: 1526-6125

Abstract

Abstract: Resistance element welding (REW) has recently attracted increasing interest, especially in the joining of high-strength steels and aluminum alloys. However, the intensity of heat input is a critical factor for the joint quality due to the possibility of excessive melting of the aluminum sheet around the element shank, which often degrades the joint's performance. This study evaluates the influence of heat input on the joint formation and mechanical performance of REW joints between ultra-high strength steel and aluminum alloy. In addition to the experimental investigations, a finite element method (FEM) was used to analyze the temperature distribution, nugget formation, and aluminum sheet melting characteristics as a function of heat input. The results show that the nugget dominates the joint's strength if the heat input is comparatively low. When heat is increased, however, the aluminum sheet plays a significant role in the joint's strength. Excessive melting of aluminum sheets reduces the load-bearing area of the joint. The competition between the weld nugget and aluminum sheet determines the joint's strength. The failure mode changes from interfacial to aluminum sheet failure as the heat input increases. The combined effect of aluminum sheet thickness and heat input on the joint strength was also evaluated. The results indicate that determining the appropriate heat input level is crucial to achieving an excellent performance of the REW joints.