A review on performance evaluation of liquid nitrogen as coolant in turning Ti-6Al-4V alloy. Issue 5 (3rd September 2022)

• Record Type: Journal Article
• Authors: Dhananchezian, M.
• Is Part Of: Machining science and technology. Volume 26:Issue 5(2022)
• Page Start: 701
• Page End: 857
• Publication Date: 2022-09-03
• Subjects: Cryogenic cooling -- liquid nitrogen -- machining performance -- Ti-6Al-4V -- turning; Machining -- Periodicals; 671.3505
• DOI: 10.1080/10910344.2023.2180749
• Languages: English
• ISSNs: 1091-0344

Abstract

Abstract: During cutting operations, cutting fluids increase heat carrying capacity from the cutting area and reduce friction at the chip-tool interface. It also offers benefits like favorable chip form, enhancement in the finish of product and tool life, lower cutting forces and power consumption during any cutting operations. But the inadequate application of cutting fluids and disposal creates several technical and environmental problems. So, due to the high demand for proper cooling and lubrication, many researchers are keen on cooling using cryogenic fluids. In this, liquid nitrogen is recognized as an effective cooling agent and a better lubricant as a cutting fluid during cutting. Beneficial outcomes are reduced insert wear rate, machined surface roughness, machining forces, power consumption, enhanced tool life and favorable form of chips with liquid nitrogen cooling through controlling the temperature at heat generation zones and thereby reduced adhesion at inter surfaces. This paper reviews the various cryogenic cooling approaches using liquid nitrogen during turning Ti-6Al-4V alloy. The features of existing liquid nitrogen approaches are compared based on the machining performance, and directions for further research are recommended.