Application of densification process in organic waste management. Issue 7 (July 2013)

• Record Type: Journal Article
• Authors: Zafari, Abedin; Kianmehr, Mohammad Hossein
• Is Part Of: Waste management & research. Volume 31:Issue 7(2013)
• Page Start: 684
• Page End: 691
• Publication Date: 2013-07
• Subjects: Pellet -- densification -- compost manure -- waste management -- response surface methodology; Factory and trade waste -- Periodicals; Refuse and refuse disposal -- Periodicals; Municipal engineering -- Periodicals; Déchets industriels -- Périodiques; Déchets -- Élimination -- Périodiques; Génie urbain -- Périodiques; 628
• DOI: 10.1177/0734242X13484191
• Languages: English
• ISSNs: 0734-242X

Abstract

Densification of biomass material that usually has a low density is good way of increasing density, reducing the cost of transportation, and simplifying the storage and distribution of this material. The current study was conducted to investigate the influence of raw material parameters (moisture content and particle size), and densification process parameters (piston speed and die length) on the density and durability of pellets from compost manure. A hydraulic press and a single pelleter were used to produce pellets in controlled conditions. Ground biomass samples were compressed with three levels of moisture content [35%, 40% and 45% (wet basis)], piston speed (2, 6 and 10 mm/s), die length (8, 10 and 12 mm) and particle size (0.3., 0.9 and 1.5 mm) to establish density and durability of pellets. A response surface methodology based on the Box Behnken design was used to study the responses pattern and to understand the influence of parameters. The results revealed that all independent variables have significant ( P < 0.01) effects on studied responses in this research.