Barium Sulfate Scale Removal at Low-Temperature. (23rd March 2021)

• Record Type: Journal Article
• Authors: Gamal, Hany; Al-Afnan, Saad; Elkatatny, Salaheldin; Bahgat, Mohamed
• Other Names: Hu Guozhong Academic Editor.
• Is Part Of: Geofluids. Volume 2021(2021)
• Publication Date: 2021-03-23
• Subjects: Hydrogeology -- Periodicals; Sedimentary basins -- Periodicals; Fluids -- Migration -- Periodicals; Groundwater flow -- Periodicals; Geothermal resources -- Periodicals; Fluid dynamics -- Periodicals; Earth -- Crust -- Periodicals; 551.49
• DOI: 10.1155/2021/5527818
• Languages: English
• ISSNs: 1468-8115

Abstract

Abstract : Precipitation of the scale in the oil and gas reservoirs, surface and subsurface equipment, and processing and production facilities is a big problem as it affects petroleum production. The scale precipitations decrease the oil and gas production and cause economical loss. Solving this issue requires an engineering investigation to provide a safe, efficient, and economic solution. Consequently, this study proposed a developed dissolver for barium sulfate scales, where two field-scale samples were collected from different locations. The compositional analysis for scale samples showed that sample 1 is 100% barium sulfate where sample 2 has 97.75% barium sulfate and 2.25% of quartz. The composition of the developed dissolver has diethylenetriamine pentaacetic acid (DTPA) as a chelating agent, oxalic acid, and tannic acids as an activator, nonionic surfactant, and water as the base fluid. The new dissolver was investigated with extensive lab tests to determine the dissolution efficiency, precipitation tendency for the dissolved scale solids, corrosion rate, and fluid-rock interaction. The obtained successful results indicated that the developed dissolver had a dissolution efficiency for two real barium scale samples as the results showed 76.9 and 71.2% at 35°C and 91.3 and 78.4% at 90°C for samples 1 and 2, respectively. The new solution has a great performance compared with common scale dissolvers in the oil field as hydrochloric acid, ethylenediaminetetraacetic acid, and diethylenetriamine pentaacetic acid. The developed dissolver showed a very low precipitation tendency for the scale dissolved solids (1.9 and 3.2% for samples 1 and 2, respectively) under 35°C for 24 hours. Without any additives of corrosion inhibitors, the corrosion rate was 0.001835 g/cm 2 at 6.9 MPa and 100°C for 6 hours. Injecting the developed dissolver for damaged sandstone core sample with barite mud by flooding test showed a return permeability of 115%.