Directly irradiated liquid metal film in an ultra-high temperature solar cavity receiver. Part 1: Concepts and a quasi-steady-state analysis. (1st May 2023)

• Record Type: Journal Article
• Authors: Abdelsalam, Tarek I.; Tian, Zhao; Robinson, Adam
• Is Part Of: Solar energy. Volume 255(2023)
• Page Start: 355
• Page End: 368
• Publication Date: 2023-05-01
• Subjects: Analytical model -- Solar thermal -- High temperature -- Liquid metal -- Receiver -- Efficiency; Solar energy -- Periodicals; Solar engines -- Periodicals; 621.47
• DOI: 10.1016/j.solener.2023.03.047
• Languages: English
• ISSNs: 0038-092X

Abstract

Graphical abstract: A new solar receiver concept involving an optically exposed flow of liquid metal to facilitate operation at ultra-high temperatures. The concept is investigated for two cavity configurations: reflective and absorptive. Highlights: A new concept for using liquid metals in solar cavity receivers is proposed. Directly irradiated liquid film used for safe operation under high radiative fluxes. A quasi-steady-state analytical model is used to evaluate the energy efficiency. Sensitivity of receiver performance to the internal optical properties are studied. Concept showed a more promising potential when coupled with absorptive cavity walls. Abstract: Solar thermal energy has the theoretical potential to deliver heat at ultra-high temperatures (>1300 K), which can enable integration with state-of-the-art thermal energy storage systems and unlock new applications, including advanced power cycles and thermal processes. Liquid metals are prospective heat transfer fluids for such systems, given their favourable thermo-physical properties, while their aggressive corrosiveness is shown to be mitigated using compatible refractory containment materials. The conventional approach of collecting concentrated solar energy typically involves intermediate solid absorbers, in form of tubes or porous structures, which are prone to thermomechanical and chemical failure under high solar radiation. This paper investigates the use of directly irradiated liquid metal (tin) film, operating between 800 and 1673 K, in two possible cavity configurations: A 'reflective cavity' and an 'absorptive cavity'. The former employs cavity walls as internal reflectors to entrap radiation by secondary reflections until directly absorbed by the liquid metal. In the latter, the directly irradiated film is used to moderate the initial shot of concentrated solar radiation before diffusively reflecting them to the absorptive cavity walls, which perform as a radiative heat exchanger used to preheat the liquid metal. The concept performance is evaluated using an approximate quasi-steady-state energy model of the receiver. The reflective cavity performance is found strongly dependent on the optical properties of its internal surfaces, which resulted in poor efficiencies (<40 %) without special treatments. The absorptive cavity demonstrated higher efficiencies (>70 %) with greater insensitivity to the optical properties, hence, promoting its consideration in future developments of this concept.