Impact of periprosthetic femoral fracture fixation plating constructs on local stiffness, load transfer, and bone strains. (January 2022)

• Record Type: Journal Article
• Authors: Chen, Xiang; Andreassen, Thor E.; Myers, Casey A.; Clary, Chadd W.; Coombs, Dana; DeWall, Ryan J.; Fritz, Bryan; Bracey, Daniel N.; Hedge, Vishal; Rullkoetter, Paul J.
• Is Part Of: Journal of the mechanical behavior of biomedical materials. Volume 125(2022)
• Publication Date: 2022-01
• Subjects: Periprosthetic femoral fracture -- Total hip arthroplasty -- Finite element analysis -- Bone stiffness -- Bone strain -- Load transfer; Biomedical materials -- Periodicals; Biomedical materials -- Mechanical properties -- Periodicals; Biomedical materials; Biomedical materials -- Mechanical properties; Periodicals; Electronic journals; 610.28
• DOI: 10.1016/j.jmbbm.2021.104960
• Languages: English
• ISSNs: 1751-6161

Abstract

Abstract: Secondary femoral fractures after the successful plate-screw fixation of a primary Vancouver type B1 periprosthetic femoral fracture (PFF) have been associated with the altered state of stress/strain in the femur as the result of plating. The laterally implanted condyle-spanning plate-screw constructs have shown promises clinically in avoiding secondary bone and implant failures as compared with shorter diaphyseal plates. Though the condyle-spanning plating has been hypothesized to avoid stress concentration in the femoral diaphysis through increasing the working length of the plate, biomechanical evidence is lacking on how plate length may impact the stress/strain state of the implanted femur. Through developing and experimentally validating finite element (FE) models of 3 cadaveric femurs, this study investigated the impact of plating on bone strains, load transfer and local stiffness, which were compared between FE models of 2 different plating systems that each had a diaphyseal configuration and a condyle-spanning configuration. Under simulated gait-loading, the condyle-spanning constructs of both plating systems were shown to lower the bone strains around the distal fixation screws (up to 24.8% reduction in maximum principal strain and 26.6% reduction in minimum principal strain) and in the distal metaphyseal shaft of the femur (up to 15.9% and 25.7% reductions in maximum and minimum principal strains, respectively), where secondary bone fractures have been typically reported. In the distal diaphyseal and metaphyseal shaft of femur, FE models of the condyle-spanning constructs were shown to increase the local compressive stiffness (up to 152.9% increases under simulated gait-loading) and decrease the transfer of compressive load (37.1% decreases under simulated gait-loading), which may be indicative of the lowered risks of bone damage.