Synthesis and Evaluation of Mesoporous Silica Nanoparticle and its Application in Chemical Enhanced oil Recovery. Issue 12 (21st March 2023)

• Record Type: Journal Article
• Authors: Vats, Sushipra; Khan, Fahad; Prajapati, Deepak; Pandey, Anurag; Sharma, Shivanjali; Saxena, Amit
• Is Part Of: ChemistrySelect. Volume 8:Issue 12(2023)
• Page Start: n/a
• Page End: n/a
• Publication Date: 2023-03-21
• Subjects: Mesoporous Silica Nanoparticles (MSN) -- Surface Tension -- Wettability alteration -- Adsorption -- Langmuir Isotherm; Chemistry -- Periodicals; 540.5
• DOI: 10.1002/slct.202204206
• Languages: English
• ISSNs: 2365-6549

Abstract

Abstract: A significant quantity of hydrocarbons remains in the reservoir after production using primary and secondary techniques. Traditional recovery techniques produce about 33 % of the original oil in place. However, the utilization of chemicals such as surfactants and polymers facilitate the additional recovery of one‐third of this oil. Researchers are currently aiming at mixing surfactant and nanoparticles for their potential applications in petroleum industry. In this work, authors claimed to be the first to study usage of synthesized Mesoporous Silica Nanoparticles (MSN) with Sodium Dodecyl Sulphate (SDS) surfactant to understand its applicability in Chemical Enhanced Oil Recovery through evaluation of the surface tension & Interfacial tension, surfactant adsorption, contact angle, and core flooding experiments. Surface tension studies revealed a synergistic interaction between MSN and anionic surfactant molecules. With the introduction of 2500 ppm of anionic surfactant, the surface tension of deionized water reduces to 34.5 mN/m from 72.4 mN/m. The surface tension of the mixture was further lowered by ∼9.8 % with the addition of 300 ppm MSN. The Interfacial Tension results also showed the same trend. When 300 ppm of MSN was introduced, then IFT values decreases from 8.13 mN/m to 3.91 mN/m at 2500 ppm of anionic surfactant. Contact angle measurements after MSN injection went from 77.98° for SDS (2500 ppm) to 73.36°, 66.54°, and 41.95° for 100, 200, and 300 ppm of MSN, respectively. This demonstrates that the shift toward water‐wet behavior increased along with the MSN concentration. Additionally, adding 300 ppm of MSN lowered surfactant adsorption by ∼80 % at a surfactant concentration of 2500 ppm. Up to 72.27 % of the OOIP could be recovered using the chemical slug made of SDS surfactant, polymer, and MSN. The research data suggests that the MSN can increase the effectiveness of the chemical injection approach, which can be used to recover more oil. Abstract : To lessen the surfactant adsorption into the sand, Mesoporous Silica Nanoparticles (MSN) are used in combination with SDS surfactants in this work. The surfactant may be used as an oil mobilization agent in the oil recovery period from aged oil fields. In trials involving adsorption, surface tension and interfacial tension, contact angle, and sand pack flooding, the Mesoporous Silica Nanoparticles (MSN) and surfactants produced encouraging results.