Millimeter-Wave Near-Field Evaluations of Polylactic Acid (PLA) Filament Used in Polymer-Based Additive Manufacturing (AM). Issue 2 (4th March 2023)

• Record Type: Journal Article
• Authors: Ahmadi, Farzaneh; Al Qaseer, Mohammad Tayeb; Zoughi, Reza
• Is Part Of: Research in nondestructive evaluation. Volume 34:Issue 2(2023)
• Page Start: 67
• Page End: 82
• Publication Date: 2023-03-04
• Subjects: PLA Filament -- Additive Manufacturing (AM) -- Millimeter-waves -- Near-field probes -- Porosity -- High spatial resolution; Nondestructive testing -- Periodicals; 620.112705
• DOI: 10.1080/09349847.2023.2189761
• Languages: English
• ISSNs: 0934-9847

Abstract

ABSTRACT: Additive manufacturing (AM) remains to be a rapidly growing industry with applications that are extended beyond metals and to other materials, such as polymers, ceramics, and concrete, to name a few. However, advancement in the development of inspection techniques, particularly in-line nondestructive testing (NDT) methods, lags significantly. Most of the research in developing such methods has focused on metal-based AM. This paper investigates the efficacy of three high-resolution near-field millimeter-wave probes for detecting small voids in the feedstock polymeric filaments used for AM. The electromagnetic (EM) design and optimization of these probes are discussed in this paper. The design of the probes is based on concentrating the interrogating electric field of an open-ended waveguide in a small region corresponding to the area of a thin dielectric slab insert. This results in achieving a higher spatial resolution than when using only the open-ended waveguide. Extending the dielectric slab to an optimum value out of the waveguide makes the electric field more concentrated and potentially further improves the spatial resolution. These modifications also reduce the detection sensitivity as a function of increasing standoff distance. However, the spatial resolution of these probes varies more rapidly as the standoff distance increases. Subsequently, the efficacy of these three probes was studied and compared using a comprehensive set of numerical EM simulations at V-band (50–75 GHz). Afterward, three such probes were fabricated, at V-band (50–75 GHz), and were used to measure the reflection responses of the stock Polylactic Acid (PLA) filaments with a very small hemispherical surface void. Root-Mean-Squared-Error (RMSE), between reference and defective filaments and over the simulated and measured frequency range, was calculated as a criterion to compare the detection capability of the three probes in the entire frequency band. The results showed that at V-band (50–75 GHz) the spatial resolution of the standard open-ended rectangular waveguide is deemed sufficient detecting small surface voids of the stock PLA filaments.