Influence of Realistic, Cyclic Atmospheric Cycles on the Pitting Corrosion of Austenitic Stainless Steels. Issue 4 (1st April 2023)

• Record Type: Journal Article
• Authors: Montoya, T.; Katona, R. M.; Karasz, E. K.; Taylor, J. M.; Snow, J.; Bryan, C. R.; Kelly, R. G.; Schaller, R. F.
• Is Part Of: Journal of the Electrochemical Society. Volume 170:Issue 4(2023)
• Publication Date: 2023-04-01
• Subjects: sea salt -- seawater -- relative humidity -- surface roughness -- profilometry -- cyclic potentiodynamic polarization; Electrochemistry -- Periodicals; 541.3705
• DOI: 10.1149/1945-7111/acc42e
• Languages: English
• ISSNs: 0013-4651

Abstract

Abstract : Pitting corrosion was evaluated on stainless steels 304H, 304, and 316L the surfaces of which had ASTM seawater printed on them as a function of surface roughness after exposure to an exemplar realistic atmospheric diurnal cycle for up to one year. Methods to evaluate pitting damage included optical imaging, scanning electron microscopy imaging, profilometry analysis, and polarization scans. The developed cyclic exposure environment did not significantly influence pitting morphology nor depth in comparison to prior static exposure environments. Cross-hatching was observed in a majority of pits for all material compositions with the roughest surface finish (#4 finish) and in all surface finishes for the 304H composition. Evidence is provided that cross-hatched pit morphologies are caused by slip bands produced during the grinding process for the #4 finish or by material processing. Additionally, micro-cracking was observed in pits formed on samples with the #4 surface finish and was greatly reduced or absent for pits formed on samples with smooth surface finishes. This suggests that both a low RH leading to an MgCl2 -dominated environment and a rough surface containing significant residual stress are necessary for micro-cracking. Finally, the use of various characterization techniques and cross sectioning was employed to both qualitatively and quantitatively assess pitting damage across all SS compositions and surface finishes.