Cylindrical magnetoelectric FeGa/PZT composite for lightning current sensing applications. (1st May 2023)

• Record Type: Journal Article
• Authors: Lu, Caijiang; Zhou, Hai; Wu, Gang; Xiao, Xiaobing; Zhang, Ziyan; Wang, Jingqi; He, Xiaomeng; Yang, Aichao; Fu, Guoqiang
• Is Part Of: Smart materials and structures. Volume 32:Number 5(2023)
• Publication Date: 2023-05-01
• Subjects: cylindrical magnetoelectric composite -- current sensor -- transient current -- lightning current measurement; Smart materials -- Periodicals; Strucural design -- Periodicals; 620.11
• DOI: 10.1088/1361-665X/acc772
• Languages: English
• ISSNs: 0964-1726

Abstract

Abstract: Magnetoelectric (ME) composites have been proven to apply to current sensors. However, the previously reported ME materials-based current sensors mainly focus on direct current and sine alternating current sensing, which put a critical limit on the measurement of transient current. In this paper, a cylindrical ME composite consisting of a magnetostrictive Fe83 Ga17 (FeGa) cylinder and a piezoelectric Pb(Zr, Ti)O3 (PZT) circular tube is fabricated for lightning current sensing applications. The time-domain output voltage of the FeGa/PZT composite is simulated and measured in detail. Under the excitation of 8/20 µ s lighting current, the output voltage of the composite can change with the current. But the damping oscillation at its resonant frequency is observed. Furthermore, to obtain an obvious ME response, the FeGa/PZT cylinder and current-carrying wire should be arranged closely and in an orthogonal way. When the amplitude of 8/20 µ s lightning current is in the range of 500 A–9 kA, the ME FeGa/PZT composite shows a sensitivity of 1.36 mV A −1, a linear response ( R 2 = 0.9993), and a small return error (0.12 V). These results provide that the ME composite is suitable to be used in non-contact lightning current measurements.