Scalable Fabrication of Microcellular Open‐Cell Polymer Foams. Issue 3 (8th December 2021)

• Record Type: Journal Article
• Authors: Chu, Raymond K. M.; Mark, Lun Howe; Park, Chul B.
• Is Part Of: Advanced engineering materials. Volume 24:Issue 3(2022)
• Page Start: n/a
• Page End: n/a
• Publication Date: 2021-12-08
• Subjects: foams -- injection molding -- microcellular -- open cells -- thermoplastics; Materials -- Periodicals; 620.11
• DOI: 10.1002/adem.202100985
• Languages: English
• ISSNs: 1438-1656

Abstract

Abstract : Open‐cell foams are foams with porous, interconnected cellular structure. This unique structure has given open‐cell foams the versatility to be used in different types of applications including acoustics, filtration, membranes, and bioscaffolds. Conventional open‐cell polymer foams comprise mainly thermosetting and/or crosslinked materials; such materials are difficult to process and have limited end‐product recyclability. This article presents a commercially viable molding process to fabricate open‐cell foams using noncrosslinked thermoplastic polypropylene (PP). Highly open‐cell and/or reticulated structures at an open‐cell content of 84% are attained. The strategies employed in molding of PP foam with high open‐cell degree include: 1) use of mold‐opening method to achieve high void fractions; 2) reduction of cell‐wall thickness through increasing the cell densities via controlled crystallization; and 3) use of low viscosity or low melt‐strength polymer resins to promote cell‐wall opening. The molding process proposed may be extended to other semicrystalline thermoplastic materials for fabricating recyclable open‐cell foams. Abstract : A scalable molding process for production of microcellular open‐cell foams using noncrosslinked thermoplastics is presented. Strategies employed to injection mold polypropylene foam with high open‐cell content include: 1) use of mold‐opening to achieve high void fractions; 2) cell‐wall thickness reduction through increasing cell densities via controlled crystallization; and 3) use of lower viscosity resin to facilitate cell‐wall opening.