Study of falling‐down‐type DLP 3D printing technology for high‐resolution hydroxyapatite scaffolds. Issue 1 (12th October 2021)

• Record Type: Journal Article
• Authors: Du, Yao; Hu, Tianyu; You, Jian; Ye, Yaoyao; Zhang, Bin; Bao, Binghui; Li, Mingyang; Liu, Yimei; Wang, Yong; Wang, Tao
• Is Part Of: International journal of applied ceramic technology. Volume 19:Issue 1(2022)
• Page Start: 268
• Page End: 280
• Publication Date: 2021-10-12
• Subjects: 3D printing -- bioceramic -- hydroxyapatite; Ceramics -- Periodicals; Ceramics -- Technological innovations -- Periodicals; 620.1405
• DOI: 10.1111/ijac.13915
• Languages: English
• ISSNs: 1546-542X

Abstract

Abstract: In this study, a strategy to print hydroxyapatite (HA) ceramics based on falling‐down‐type digital light processing (DLP) 3D printing technology with high accuracy was proposed. The monolayer curing thickness and curing broadening of the samples were compared under different conditions, and the most suitable photoinitiator for the system and optimal amount of additive dye in the slurry were obtained. The light power density and single‐layer exposure time of the light source of the DLP printer were optimized, and a number of high‐resolution models of HA scaffolds with an exact square‐channel aperture width of 380 μm were successfully printed. The shrinkage, microstructural, and mechanical properties of the HA ceramic scaffolds were studied at different sintering temperatures. The microstructure and composition of the scaffolds were also characterized by scanning electron microscopy and X‐ray diffractometry. The compressive strength and compressive modulus of HA porous scaffold were 11.61 MPa and 1.26 GPa, respectively. And the porosity of scaffold was 31.67%.