Characterization of two-phase flow in a faulted sandstone. (March 2023)

• Record Type: Journal Article
• Authors: Seyyedi, Mojtaba; Giwelli, Ausama; Monmusson, Ludwig; Clennell, Michael Benedict
• Is Part Of: International journal of greenhouse gas control. Volume 124(2023)
• Publication Date: 2023-03
• Subjects: Fault zone -- Fault core -- Damage zone -- Fracture network -- Two-phase flow -- CO2 storage; Greenhouse gases -- Environmental aspects -- Periodicals; Air -- Purification -- Technological innovations -- Periodicals; Gaz à effet de serre -- Périodiques; Gaz à effet de serre -- Réduction -- Périodiques; Air -- Purification -- Technological innovations; Greenhouse gases -- Environmental aspects; Periodicals; 363.73874605
• DOI: 10.1016/j.ijggc.2023.103841
• Languages: English
• ISSNs: 1750-5836

Abstract

Highlights: New insights into gas plume migration, and gas conductivity and trapping in fault zones. New insights into the role of fault core-damage zone configuration on gas flow behaviour and trapping. 3D characterization of the damage zone and fault core. Abstract: Fault zones present in some underground CO2 storage formations can impact on injectivity, storage capacity, and the path taken by migrating CO2, including possible leakage to overlying formations and the escape of a plume beyond the area of a demarcated storage lease licence. A thorough understanding of the 2-phase flow in fault zones is therefore essential to de-risk any storage location where faults could be present. Many previous studies have addressed top-seal risks from fault reactivation, but the influence of intra-reservoir faults on flow within the target storage formations has received less attention. Studies of intraformational faults in sandstones have typically used plugs cored from outcrops or from subsurface boreholes, where important aspects of the geological history such as the stress conditions during faulting, and the degree of post-faulting compaction and cementation may be poorly constrained. Moreover, only intact fault rocks can be cored and re-loaded under stress with this approach, so that it is very difficult to establish the interacting effects or rock fractures and cataclastic gouge in a single experiment using borehole/outcrop samples. This study investigates newly created fault rock in sandstone that has been deformed under controlled conditions and without the effects of secondary cementation. We used a large direct shear rig to deform a large, water-saturated Bentheimer sandstone block to sufficient displacement (40mm) and under enough overburden pressure (25 MPa) to create a zone of cataclastic gouge several mm thick bounded by a damage zone of fractured rock. The sheared block was cored at an inclined angle while deep frozen to extract an oriented plug containing a complete and intact section of fault rock that could be reloaded under hydrostatic conditions in an x-ray transparent core holder. The faulted plug of Bentheimer was used for running steady-state drainage and imbibition 2-phase flow experiments. The fluid saturation and its spatial distribution in 3D inside the faulted plug were dynamically monitored during all stages of the experiment in a medical x-ray CT scanner. Analysis of the flow patterns revealed from the X-ray CT images collected over time enables us to characterize in detail, the influence of recently formed fault core and damage zones on fluid flow both during drainage as gas breaks across the fault zone, and as water re-invades during imbibition. The fault core acts as a semi-permeable membrane that is only permeable to the wetting phase (water) under pressure differentials less than the capillary entry pressure (Pce) of the membrane. During drainage stages, the high Pce of the fault core led to backfilling of the upstream end of the core and almost to compartmentalization of the sample. The fracture network that exists in the damage zone played a critical role in keeping the upstream side of the fault core connected to the downstream side. During imbibition stages, the high Pce of the fault core led to significant gas trapping at the upstream side of the fault core adjacent to the fault core-damage zone interface. While the fault core formed a barrier to flow, the fracture network can provide bypass pathways for gas flow. In this particular sample bypassing through fractures was sufficient such that for a particular value of average gas saturation the flow rate was faster in the faulted rock than in the unfaulted reservoir rock.