A numerical analysis of ZnTe/AZO as tunnel junction in CdTe/Si tandem solar cell. Issue 1 (1st February 2023)

• Record Type: Journal Article
• Authors: Isah, M; Doroody, C; Rahman, K S; Harif, M N; Tiong, S K; Amin, N
• Is Part Of: IOP conference series. Volume 1278:Issue 1(2022)
• Publication Date: 2023-02-01
• Subjects: Cadmium Telluride -- Silicon -- Tandem Solar Cell -- ZnTe/AZO -- Tunnel-Junction -- wxAMPS -- Numerical Simulations; Materials science -- Periodicals; 620.1105
• DOI: 10.1088/1757-899X/1278/1/012003
• Languages: English
• ISSNs: 1757-8981

Abstract

Abstract: Recently, interest has shifted towards developing multijunction or tandem solar cells due to their high potential to generate higher efficiency than traditional single-junction solar cells. Cadmium telluride (CdTe) and silicon (Si) solar cell materials have demonstrated significant potential in photovoltaic energy generation as tandem structures if fully developed. One approach for optimising CdTe/Si is to develop an effective tunnel junction that can electrically and optically interconnect the cadmium telluride and silicon cells with minimal loss. The wxAMPS 3.0 numerical simulation was used in this work to develop CdTe/Si tandem using zinc telluride/aluminium doped zinc oxide (ZnTe/AZO) as a tunnel junction (TJ). The result obtained shows an optimum efficiency of over 36 % with Voc = 1.945 V, Jsc = 21.519 mA/cm 2, and FF = 86.823 % utilising the optimal 200 nm CdTe and Si absorber thickness of 300 μm. An analysis of the demonstrated results suggests that ZnTe/AZO tunnel junction will significantly contribute to the realisation of the CdTe/Si tandem solar cell. Hence, upon inserting a 40 nm highly doped ZnTe/AZO tunnelling junction to a CdTe/Si tandem configuration, the solar cell's performance was enhanced by 48.190%.