Experimental study of frictional resistance influences on tunnel face stability. Issue 1 (1st January 2023)

• Record Type: Journal Article
• Authors: Kawanoue, R; Yagihashi, T; Togashi, Y; Osada, M
• Is Part Of: IOP conference series. Volume 1124:Issue 1(2023)
• Publication Date: 2023-01-01
• Subjects: Earth sciences -- Periodicals; Environmental sciences -- Congresses; Environmental sciences -- Periodicals; 550.5
• DOI: 10.1088/1755-1315/1124/1/012103
• Languages: English
• ISSNs: 1755-1307

Abstract

Abstract: In recent years, there have been several ground surface collapses due to tunnel excavation in Japan. Although such accident is caused by ground loosening and tunnel face collapses due to excavation, there is no accepted theory for estimating the face stability because this phenomenon is quite complicated and highly influenced by the supports and lining types. Specifically, the loosened area is relatively large for the urban NATM method, which applied in a shallow sedimentary rock layer. Therefore, a method to quantitatively evaluate the tunnel face stability by this kind of mechanical property is essential. In this study, 2D tunnel pull-out test was conducted to observe the influence of frictional resistance on tunnel face failure and loosening area by changing the shear resistance angle using three particle sizes of dry silica sand and different variation of earth covering. The result demonstrated that failure region doesn't reach the ground surface when the shear resistance angle is 46.4° and covering thickness to tunnel height ratio H/D is over 5 or the angle is 55.8° and H/D is over 3. This study considered that there is an arch effect depending on frictional resistance and earth coverings occurred. Furthermore, even with the same earth covering, the smaller the shear resistance is, the earlier the ground surface collapses. Therefore, it could be said that the higher the frictional resistance is, the later the collapse proceeds.