Investigation of co-pyrolysis blends of camel manure, date pits and plastic waste into value added products using Aspen Plus. (15th May 2023)

• Record Type: Journal Article
• Authors: Al-Rumaihi, Aisha; Shahbaz, Muhammad; Mckay, Gordon; Al-Ansari, Tareq
• Is Part Of: Fuel. Volume 340(2023)
• Publication Date: 2023-05-15
• Subjects: Co-pyrolysis -- Plastic waste -- Sensitivity analysis -- Optimisation -- Modelling; Fuel -- Periodicals; Coal -- Periodicals; Coal; Fuel; Periodicals; 662.6
• DOI: 10.1016/j.fuel.2023.127474
• Languages: English
• ISSNs: 0016-2361

Abstract

Highlights: Pyrolysis of plastic, camel manure, plastic and their blend is performed. Equilibrium process model of pyrolysis is developed using Aspen Plus. Impact of temperature and blending ratio on pyrolysis products are analysed. Optimum temperature and scenario are determined to maximise the pyrolysis products. The results of the current study is compared with the reported literature. Abstract: The increasing demand for energy worldwide and growing environmental concerns is the impetus for greater integration of alternate sustainable technologies. In parallel, the efficient and safe management of plastic waste is needed since it is reported that only 9 % of plastic is recycled, while 76 % is landfilled. This study performs a co-pyrolysis of four main types of feedstocks, such as camel manure (CM), date pits (DP), low-density polyethylene (LDPE) and high-density polyethylene (HDPE). Additionally, different mixing scenarios of those feedstocks are also studied. For this purpose, a simulated equilibrium model for the pyrolysis process is developed using Aspen Plus®, which also investigates the impact of waste types, blends, and temperature on pyrolysis product distribution. Pyrchar and pyrgas production are major products for camel manure and date pits and also for plastic wastes with higher production. In biomass feedstock, the highest production of pyrgas is 623.78 kg/hr for camel manure and 555.69 kg/hr for date pits at 600 °C. The maximum production of pyrchar is 485.43 kg/hr for LDPE and 618.46 kg/hr for plastic feedstock (HDPE). As for mixing scenarios, the production of pyrchar is maximum at a ratio of 0.2CM: 0.2DP: 0.3LDPE: 0.3HDPE (S6) and 0CM: 0DP: 0.5LDPE: 0.5HDPE (S7) and a temperature of 600 °C resulting in 448.15 kg/hr and 614.69 kg/hr respectively. The pyrgas production at mixing ratio of 0.25CM: 0.25DP: 0.25LDPE: 0.25HDPE (S5) and 0.5CM: 0.5DP: 0LDPE: 0HDPE (S8) is maximum with 405.21 kg/hr and 589.24 kg/hr respectively at a temperature of 600 °C. Pyroil production is highest at a temperature of 300 °C for all scenarios resulting in a maximum production of date pits of 309.92 kg/hr.