Modeling and electromechanical performance of improved smart aggregates using piezoelectric stacks. (2nd February 2023) - Xu, Huaibing
Abstract: Smart aggregates (SAs) are often formed by embedding lead zirconate titanate (PZT) patches into concrete or marble blocks. They not only have the advantages of low cost, quick response, high reliability, and long service life, but also possess comprehensive actuating and sensing abilities, and have been widely used in structural health monitoring in the field of civil engineering. However, due to the plate-like geometry of the PZT patch and the limited number of layers, SAs have a relatively short sensing range. To solve this issue, a new type of SA using piezoelectric stacks was developed. Theoretical modeling of this new transducer was established, and prototypes were fabricated. Comparisons between the theoretical predictions and the experimental results are presented, and good agreement can be found. The effects of the key parameters, including the total height of the specimen, the elastic modulus of the cement, the radius of the piezoelectric stack, the thickness of the piezoelectric layer, and the number of piezoelectric layers in the piezoelectric stack, on the electromechanical properties were analyzed, and the guidelines for optimal design were presented. In addition, the improved and the traditional SAs were used to monitor the water content in soil specimens based on the electromechanical impedance technique. The results showed that the improved SAs using piezoelectric stacks are more sensitive than the traditional ones, and have good potential in structural health monitoring in the field of civil engineering.