Elevated-temperature wear behavior of Ti6Al4V alloy: microstructural evolution and properties change in subsurfaces and mild-severe wear transition. (1st March 2023)

• Record Type: Journal Article
• Authors: An, J; Zhang, S G; Du, D H; Chen, H X
• Is Part Of: Surface topography. Volume 11:Number 1(2023)
• Publication Date: 2023-03-01
• Subjects: Ti6Al4V alloy -- wear transition -- microstructure -- softening -- dynamic recrystallization; Surfaces (Physics) -- Periodicals; Surfaces (Physics) -- Measurement -- Periodicals; 530.417
• DOI: 10.1088/2051-672X/acb564
• Languages: English
• ISSNs: 2051-672X

Abstract

Abstract: Dry sliding wear behavior of Ti6Al4V alloy was studied at elevated temperatures of 50 °C–400 °C. The constituent phases and morphologies of worn surfaces were examined to evaluate the roles of oxide layers and wear mechanisms in mild-severe wear transition (M-SWT). Microstructural evolution and hardness change in subsurfaces were also investigated to reveal the most fundamental reason for M-SWT. The results showed that M-SWT happened via severe plastic deformation (SPD) within 20 °C–350 °C, while mild wear prevailed via a protective mechanically mixed layer (MML) containing multiple oxide phases at 400 °C. Large surface plastic deformation and frictional heat activated dynamic recrystallization (DRX) softening in subsurface, which resulted in M-SWT. The critical load for M-SWT presented an approximate linear relationship with testing temperature within 20 °C–250 °C, from which a critical temperature of 555.8 °C for M-SWT was obtained by linearly fitting method. It was thought as the critical temperature for DRX realization in surface layer, and it was utilized to calculate the transition loads at 300 °C and 350 °C.