A test rig for the full characterization of the dynamics of shrouded turbine blades. (15th April 2023)

• Record Type: Journal Article
• Authors: Ahmed, Rizwan; Firrone, Christian Maria; Zucca, Stefano
• Is Part Of: Mechanical systems and signal processing. Volume 189(2023)
• Publication Date: 2023-04-15
• Subjects: Turbine blade vibrations -- Shrouded blades -- Friction damping -- Nonlinear dynamics -- Contact force measurement -- Test rig; Structural dynamics -- Periodicals; Vibration -- Periodicals; Constructions -- Dynamique -- Périodiques; Vibration -- Périodiques; Structural dynamics; Vibration; Periodicals; 621
• DOI: 10.1016/j.ymssp.2022.110080
• Languages: English
• ISSNs: 0888-3270

Abstract

Abstract: Highly stressed forced vibrations experienced by Low Pressure Turbine (LPT) blades during their operation can result in high cycle fatigue (HCF) which can ultimately lead to failure. To avoid this occurrence, the vibration amplitudes must be anticipated and reduced. This is generally done by employing friction damping devices like under-platform dampers, shrouds and snubbers. In case of blades with shrouds at their tips, the adjacent shrouded blades are coupled to each other and three-dimensional periodic shroud contact forces acting on shrouds significantly influence the vibration amplitudes as energy is dissipated due to friction. Hence, for the experimental validation of the numerical contact models that are used for the prediction of nonlinear forced response of shrouded blades, it is equally necessary to measure the contact forces acting at the shrouds. Moreover, present-day requirement of more accurate and detailed models requires thorough and comprehensive experimental validation calling for the measurement of three-dimensional shroud contact forces from purposely designed test rigs. This study presents the design, development and operation of an experimental test rig that allows full characterization of the dynamics of shrouded turbine blade, i.e., simultaneous measurement of three-dimensional shroud contact forces and shrouded blade forced response. The starting point was the design of the test rig components based on the design requirements. This is followed by the description of the major components of the proposed test rig i.e., the three-dimensional contact force measurement system and the torque screw mechanism. In the subsequent section, the details of the experimental setup to measure the forced response and three-dimensional shroud contact forces simultaneously are highlighted as the test campaign is performed for different normal preloads and excitation force levels. Consequently, the effects of the variation in the normal preload and excitation force on the measured response and shroud contact forces are discussed. Finally, it is shown how the results establish the efficacy of the proposed test rig in providing a comprehensive depiction of the dynamic response of the shrouded blade and 3D shroud contact forces that will result in more accurate and reliable experimental validation of numerical tools.