Ballistic impact response and failure mechanism of aluminum/ultrahigh molecular weight polyethylene fiber laminates with different adhesive quantity. Issue 1 (10th September 2022)

• Record Type: Journal Article
• Authors: Ge, Fei; Zhang, Zhongwei; Sun, Minqian; Lin, Yuan; Wu, Jianan; Xiong, Ziming; Wang, Mingyang
• Is Part Of: Polymer composites. Volume 44:Issue 1(2023)
• Page Start: 89
• Page End: 102
• Publication Date: 2022-09-10
• Subjects: adhesive quantity -- ballistic impact -- failure mechanism -- fiber metal laminates -- metal‐composite interface -- split Hopkinson tie bar; Polymeric composites -- Periodicals; 620.192
• DOI: 10.1002/pc.27028
• Languages: English
• ISSNs: 0272-8397

Abstract

Abstract: The aim of this study is to investigate the effects of metal‐composite interface (MCI) adhesive quantity on the energy absorption and failure behavior of fiber metal laminates (FMLs) under ballistic impact. The dynamic shear and ballistic impact tests were systematically conducted, and CT scan was employed to quantitatively investigate the damage and failure mechanisms of the FMLs. The results reveal that the dynamic shear strength of MCI initially increases and then remains constant with the increase in the adhesive quantity at a constant strain rate. Moreover, the MCI adhesive quantity has a certain influence on the impact energy absorption of FMLs, and the degree of influence is related to the impact velocity. At an impact velocity of 360 m/s, the difference of energy absorption is maximal, approximately 14.7%. The distribution of total debonding area changes with increase in the adhesive quantity. When the impact velocity is 212 m/s, compared to FMLs with the lowest adhesive quantity, the total debonding area of FMLs with the highest adhesive quantity decreases by 774.57 mm 2 (9.20%), otherwise the debonding area near the rear aluminum alloy sheet increases by 595.94 mm 2 (58.99%). Abstract :