Effects of Transition Zone on Magnetic Properties of Low Temperature Oxidation of Magnetite Particle:Comparison of Experiment and Micromagnetic Modeling. Issue 1 (May 2020) - Ge, K
Abstract: A relationship of hysteresis parameters and oxidation of ultrafine magnetic particles on both experimental measurements and micromagnetic simulations is obtained through a step-by-step oxidation of magnetite. Numerical simulations of hysteresis loop and microstructure of a core-shell geometry with transition zone using a multi-layer structure show two categories of behaviour for magnetic grains during oxidation. First, the SD (Single Domain, <70 nm) and lager SV (Single Vortex, >130 nm) particles remain unchanged ratio of saturation remanence to saturation magnetization ( M rs / M s ), and slightly decreased coercivity ( B c ) during oxidation. Second, the fine SV particles (80 nm to 120 nm), the hysteresis parameters respectively increase and dramatic decrease at the early and late stage of oxidation, and the micromagnetic behaviors vary significantly. Finally the hysteresis parameters of larger SV particles remain nearly unchanged during oxidation. The predicted magnetic properties for the core-shell model exhibit better agreement with experimental data than that of previously used core-shell geometry (a stoichiometric core surrounded by an oxidized shell). It indicates that the magnetic properties of partially oxidized magnetic grains are controlled by the multi-layer coupling effects and can record paleomagnetic signals.