Simulation of a single-phase arc grounding fault on a 220-kV cable transmission system. (November 2020)

• Record Type: Journal Article
• Authors: Gong, Qiming; Liu, Surong; Zheng, Jiankang; Su, Xiaoting; Li, Shaobin
• Is Part Of: Journal of physics. Volume 1678(2020)
• Publication Date: 2020-11
• Subjects: Physics -- Congresses; 530.5
• DOI: 10.1088/1742-6596/1678/1/012049
• Languages: English
• ISSNs: 1742-6588

Abstract

Abstract: Cable tunnel fires are mainly caused by single-phase arc grounding faults. The massive energy generated by arc can threaten the safety of the densely laid cable tunnels. In this study, a digital arc fault model with a 220-kV cable transmission system was established on Power Systems Computer Aided Design(PSCAD). The arc model was improved because the parameters were acquired from the experimental results. The arc fault can be divided into two stages: a primary arc at the initiation of the fault and a secondary arc after the tripping of the circuit breakers. The primary arc contains few nonlinear components because of the large arc currents. The secondary arc voltages exhibit nonlinear characteristics because of arc elongation. The secondary arc power continues to increase, however, its amplitude is considerably smaller than the primary arc. The lifetime of the primary arc is dependent on the action of the relaying protection system. Further, some limits based on the energy balance theory were introduced to obtain the extinction time of the secondary arc. In addition, the total energy generated by the arc fault in the 220-kV cable transmission system will eventually become 4891 kJ. This digital arc fault model will significantly contribute to future research with respect to the mechanism of cable tunnel fires.