Diamond-Like Carbon for the Fast Timing MPGD. (April 2020)

• Record Type: Journal Article
• Authors: Colaleo, A.; De Robertis, G.; Licciulli, F.; Maggi, M.; Ranieri, A.; Simone, F.; Valentini, A.; Venditti, R.; Verwilligen, P.; Cesaria, M.; Calcagnile, L.; Caricato, A.P.; Di Giulio, M.; Lorusso, A.; Manno, D.; Martino, M.; Perrone, A.; Quarta, G.; Serra, A.; Ressegotti, M.; Riccardi, C.; Salvini, P.; Vitulo, P.; Vai, I.; Roskas, C.; Tytgat, M.
• Is Part Of: Journal of physics. Volume 1498(2020)
• Publication Date: 2020-04
• Subjects: Physics -- Congresses; 530.5
• DOI: 10.1088/1742-6596/1498/1/012015
• Languages: English
• ISSNs: 1742-6588

Abstract

Abstract: The present generation of Micro-Pattern Gaseous Detectors (MPGDs) are radiation hard detectors, capable of detecting effciently particle rates of several MHz/cm 2, while exhibiting good spatial resolution (≤ 50 µm) and modest time resolution of 5-10 ns, which satisfies the current generation of experiments (High Luminosity LHC upgrades of CMS and ATLAS) but it is not sufficient for bunch crossing identification of fast timing systems at FCC-hh. Thanks to the application of thin resistive films such as Diamond-Like Carbon (DLC) a new detector concept was conceived: Fast Timing MPGD (FTM). In the FTM the drift volume of the detector has been divided in several layers each with their own amplification structure. The use of resistive electrodes makes the entire structure transparent for electrical signals. After some first initial encouraging results, progress has been slowed down due to problems with the wet-etching of DLC-coated polyimide foils. To solve these problems a more in-depth knowledge of the internal stress of the DLC together with the DLC-polyimide adhesion is required. We will report on the production of DLC films produced in Italy with Ion Beam Sputtering and Pulsed Laser Deposition, where we are searching to improve the adhesion of the thin DLC films, combined with a very high uniformity of the resistivity values.