Branch module for an inductive voltage adder for driving kicker magnets with a short circuit termination. Issue 1 (1st January 2023)

• Record Type: Journal Article
• Authors: Ruf, J; Barnes, M J; Dutheil, Y; Kramer, T; Sack, M
• Is Part Of: Journal of physics. Volume 2420:Issue 1(2023)
• Publication Date: 2023-01-01
• Subjects: Physics -- Congresses; 530.5
• DOI: 10.1088/1742-6596/2420/1/012086
• Languages: English
• ISSNs: 1742-6588

Abstract

Abstract: For driving kicker magnets terminated in a short circuit, a branch module for an inductive voltage adder has been designed and assembled. The module has been designed for a maximum charging voltage of 1.2 kV and an output current of 200 A considering the current doubling due to the short circuit termination. It features three consecutive modes of operation: energy injection, freewheeling, and energy extraction. Therefore, the topology of the branch module consists of two independently controlled SiC MOSFET switches and one diode switch. In order not to extend the field rise time of the kicker magnet significantly beyond the magnet fill time, the pulse must have a fast rise time. Hence, the switch for energy injection is driven by a gate boosting driver featuring a half bridge of GaN HEMTs and a driving voltage of 80 V. Measurements of the drain source voltage of this switch showed a fall time of 2.7 ns at a voltage of 600 V resulting in a voltage rise time of 5.4 ns at the output terminated with a resistive load. To meet both the rise time and current requirements, a parallel configuration of four SiC MOSFETs was implemented.