Mapping of bovine pericardium to enable a standardized acquirement of material for medical implants. (June 2021)

• Record Type: Journal Article
• Authors: Stieglmeier, Felix; Grab, Maximilian; König, Fabian; Büch, Joscha; Hagl, Christian; Thierfelder, Nikolaus
• Is Part Of: Journal of the mechanical behavior of biomedical materials. Volume 118(2021)
• Publication Date: 2021-06
• Subjects: Biomaterial -- Bovine pericardium -- Cartography -- Decellularization -- Durability testing -- Tissue engineering; BP bovine pericardium -- DC decellularization -- HC high cycle system -- IA investigation area -- LD longitudinal direction -- CD circumferential direction -- CP commercial patch -- HF heart-facing side -- HA heart-averted side; Biomedical materials -- Periodicals; Biomedical materials -- Mechanical properties -- Periodicals; Biomedical materials; Biomedical materials -- Mechanical properties; Periodicals; Electronic journals; 610.28
• DOI: 10.1016/j.jmbbm.2021.104432
• Languages: English
• ISSNs: 1751-6161

Abstract

Abstract: Objectives: Bovine pericardium - native, fixed as well as decellularized - is one of the most common implant materials in modern cardiovascular surgery. Although used in everyday procedures, there are no recommendations in regard to which part of the pericardium to prefer. It was the aim of this study, to identify areas of the pericardium with consistent properties and high durability. Methods: Fresh bovine pericardia were collected from a local slaughterhouse. The native pericardia were analyzed at 140 spots in regard to thickness and fiber orientation. Based on these results, five promising areas were selected for further evaluation. The pericardia were decellularized with detergents (0.5% sodiumdesoxycholate/0.5% sodiumdodecylsulfate) and subsequently incubated in DNAse. The two investigation groups native und DC consisted of 20 samples each. The efficiency of the decellularization was evaluated by DNA quantification, as well as DAPI and H&E staining. Biomechanical properties were determined using uniaxial tensile tests. To evaluate the microstructure, scanning electron microscopy, Picrosirius Red- and Movat's Pentachrome staining were utilized. To assess the long-term durability, patches were tested in a high-cycle system for a duration equaling the stress of three months in-vivo. Commercially available, fixed pericardium patches served as control group. Results: Only a limited part of the pericardium showed a homogenous and usable thickness. The decellularization removed all cell nuclei, proven by negative DAPI and H&E staining, and also significantly reduced the DNA amount by 84%. The mechanical testing revealed that two investigated areas had an inconsistent tensile strength. Microscopical observations showed that the integrity of the extracellular matrix did not suffer by the decellularization procedure. During the long-term testing, most of the pericardia slowly lost tautness, though none of them got measurably damaged. Especially one area showed no decline of tensile strength after durability testing at all. Decellularized patches and fixed patches achieved comparable results in mechanical testing and microscopical evaluation after the durability testing. Conclusion: We could clearly document significant, location-based differences within single pericardia. Only one area showed consistent properties and a high durability. We highly recommend taking this into account for future implant material selections. Graphical abstract: Image 1 Highlights: Bovine pericardium is one of the most common xenogenic implant materials. There is no recommendation, which part of the pericardium should be preferred. Significant, location-based differences within single pericardia were documented. Only one area showed consistent properties and a high durability.