Phase change materials-impregnated biomass for energy efficiency in buildings: Innovative material production and multiscale thermophysical characterization. (February 2023)

• Record Type: Journal Article
• Authors: Fabiani, Claudia; Santini, Carolina; Barbanera, Marco; Giannoni, Tommaso; Rubino, Gianluca; Cotana, Franco; Pisello, Anna Laura
• Is Part Of: Journal of energy storage. Volume 58(2023)
• Publication Date: 2023-02
• Subjects: BET Brunauer–Emmett–Teller -- BC Biochar -- DSC Differential Scanning Calorimetry -- FT-IR Fourier-Transform infrared -- G Gypsum -- LG Lignin -- LT Leakage Test -- PCMs Phase Change Materials -- RT RubiTherm -- SEM Scanning Electron Microscopy -- TGA Thermogravimetric Analysis -- TM Thermal monitoring -- TPS Transient Plane Source -- Ta, int Internal air temperature -- Tcc Climatic chamber temperature -- Ts, est External surface temperature -- Ts, int Internal surface temperature; Biochar -- Phase change materials (PCMs) -- Thermal energy storage -- Vacuum impregnation; Energy storage -- Periodicals; Energy storage -- Research -- Periodicals; 621.3126
• DOI: 10.1016/j.est.2022.106223
• Languages: English
• ISSNs: 2352-152X

Abstract

Abstract: In this work, different phase change materials (PCMs) were stabilized in biochar and lignin by vacuum impregnation technique and later incorporated into gypsum panels in real building applications. We used three types of paraffin, with phase transition temperatures of 21, 27, and 31 °C, respectively, i.e., within the most common thermal comfort conditions in building applications and two bio-based porous matrices, lignin and biochar. In doing so, we aimed at producing and characterizing an environmentally friendly shape-stabilized material, to be easily integrated into gypsum-based building components. The obtained compounds were analyzed at various scales of investigations using Brunauer–Emmett–Teller (BET), Hot Disk, Fourier-Transform infrared (FT-IR) spectroscopy, Scanning Electron Microscopy (SEM), thermal cycling, Differential Scanning Calorimetry (DSC), and Thermogravimetric (TGA) analyses, to adequately assess the composites' thermophysical performance and long-term stability. The obtained results highlight the promising thermal buffer capability of the shape-stabilized samples, particularly in the case of the paraffin with a melting temperature of 21 °C, which obtained the highest impregnation rate. In general, all the compounds tend to lose PCM during cycling. However, significant leakage was only found above 100 °C, therefore, the samples show a relatively stable behavior for applications within the most common local boundary conditions in the built environment. Highlights: Reuse of biochar: from waste material to impregnation matrix for PCM containment Optimization of the vacuum impregnation technique of PCM in biochar and thermochemical characterization of the compounds Multiscale thermophysical analysis of shape-stabilized PCMs with transition temperatures of 21 °C, 27 °C, and 31 °C Production of composites with reduced leakage and good thermal conductivity and latent heat of fusion Production of thermally enhanced gypsum panels building capable of reducing surface and air temperatures indoors