Effect of chemical additives on electrokinetic remediation of Cr-contaminated soil coupled with a permeable reactive barrier. Issue 5 (1st May 2019)

• Record Type: Journal Article
• Authors: Yu, Xu; Muhammad, Faheem; Yan, Yujie; Yu, Lin; Li, Huilin; Huang, Xiao; Jiao, Binquan; Lu, Ning; Li, Dongwei
• Is Part Of: Royal Society open science. Volume 6:Issue 5(2019)
• Publication Date: 2019-05-01
• Subjects: electrokinetic remediation -- permeable reactive barrier -- Cr(VI)-contaminated soil -- chemical additives; Science -- Periodicals; 500
• DOI: 10.1098/rsos.182138
• Languages: English
• ISSNs: 2054-5703

Abstract

Abstract : Chromium (Cr) contamination in soil, especially Cr(VI), is a serious threat to the environment and human health. The electrokinetic remediation (EKR) is a promising technology to remediate the Cr(VI). Therefore, in this study, EKR coupled with a permeable reactive barrier (PRB) was used to treat the Cr(VI)-contaminated soil. The CTMAB-Z, a modified zeolite (prepared with cetyltrimethyl ammonium bromide) alone and a mixture of CTMAB-Z and Fe(0) were used as PRB-1 and PRB-2 reactive media, respectively. The effect of chemical enhancers/additives, i.e. DL-tartaric acid and Tween 80 on EKR of Cr(VI) was also analysed in the contrasting experiments. While the effects of repair time, voltage gradient and DL-tartaric acid concentration on Cr(VI) remediation were investigated by using the multifactor orthogonal experiment which was based on contrasting experiments. The contrasting experiment results showed that the highest Cr(VI) removal rate (66.27%) and leaching efficiency (71.29%) were observed in the experimental group which had DL-tartaric acid and PRB-2. Furthermore, the multifactor orthogonal experiment results had depicted that the highest Cr(VI) removal rate (80.92%) and leaching efficiency (85.25%) were achieved after treating the samples at a voltage gradient of 2.5 V cm −1 for 8 days in the presence of 0.15 M concentration of DL-tartaric acid. This study demonstrated that Cr(VI) remediation through EKR process could be significantly enhanced by the use of PRB and additives.