Investigation on thickness size effect on ductility of magnetron sputtered Niobium coatings on SS316L substrate for forming of precoated metallic bipolar plates. Issue 1 (1st December 2022)

• Record Type: Journal Article
• Authors: Li, C Z; Xu, Z T; Peng, L F; Lai, X M
• Is Part Of: IOP conference series. Volume 1270:Issue 1(2022)
• Publication Date: 2022-12-01
• Subjects: Materials science -- Periodicals; 620.1105
• DOI: 10.1088/1757-899X/1270/1/012111
• Languages: English
• ISSNs: 1757-8981

Abstract

Abstract : Metallic bipolar plates (BPPs) are key components of the proton exchange membrane fuel cell (PEMFC). To lower the fabrication cost of metallic BPPs, precoated BPPs have attracted much attention due to the high efficiency of precoating-stamping process. However, precoatings on metallic substrate tend to crack during the forming process, leading to deterioration or even complete loss of corrosion resistance. Therefore, to avoid micro cracks of formed precoated BPPs, development of coatings with high ductility is necessary. In this study, Niobium coatings with different thicknesses on SS316L substrate are prepared with magnetron sputtering process, and uniaxial tensile tests are then conducted for the precoated specimens to evaluate their ductility. The microstructure and fracture behaviour of the Niobium precoatings are characterized by XRD, SEM, TEM, laser confocal microscope analysis. It is found that with the increase of coating thickness, the number of micro cracks at the same strain decreases significantly, and the strain for the first crack to appear also increases. Furthermore, a brittle-to-ductile transition of fracture mechanism is observed. The grain size of Niobium nanocrystalline coating increases with the thickness, which leads to the improvement of plasticity and failure strain. Therefore, the application of precoated metallic BPPs is further advanced.